AT2022

The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	X/Y Stereo
Frequency Response	20 - 20,000 Hz
Low Frequency Roll Off	150 Hz, 6 dB/octave
Open Circuit Sensitivity	-41 dB (8.9 mV) re 1V at 1 Pa
Channel Balance	<2.5 dB
Maximum Input Sound Level	122 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	103 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	75 dB, 1 kHz at 1 Pa
Battery Type	1.5V AA/UM3
Battery Current/Life	1.2 mA / 500 hours typical (alkaline)
Switches	Off, on/flat, on/roll-off
Weight	270g
Cable	0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
Dimensions	192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch