AT33MONO
Dual Moving Coil Cartridge

AT33MONO

AT33MONO
  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews

Overview

AT33MONO

The AT33MONO is designed specifically for use with mono vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records.

 The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance. Because the AT33MONO does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations. * This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play microgroove 33-1/3 and 45 RPM vinyl records.

AT33MONO

Features

The AT33MONO is designed specifically for use with mono vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance. Because the AT33MONO does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations. * This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play microgroove 33-1/3 and 45 RPM vinyl records.

Specifications

Cartridge & Stylus
Frequency Response 20 - 20,000Hz
Channel Separation 30dB (1kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 2.3 to 2.7 g (standard 2.5 g)
Recommended Load Impedance More than 100Ω (when head amp connected)
Coil Impedance 10Ω (1kHz)
DC Resistance 10Ω
Coil Inductance 28µH (1kHz)
Output Voltage 0.35mV (1kHz and 5cm/sec. horizontal signal)
Output Channel Balance 1.0dB (1kHz)
Stylus Shape Conical
Cantilever Duralumin pipe
Static Compliance 20×10-6cm/dyne
Dynamic Compliance 6×10-6cm/dyne (100Hz)
Mounting 1/2" Centers
Dimensions H16×W16.6×D26.5mm
Accessories Included Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
Body Material Aluminium/Synthetic Resin
Stylus Size 0.65 mil
Type MC-type
Weight 6.9g

Reviews

Downloads

Declaration of Conformity
AT33MONO Datasheet