The ATGM2 boom microphone lets you convert your favorite pair of headphones into a full-fledged headset for gaming, streaming and VoIP use. The boom’s small base mounts permanently to the headphone housing, allowing you to install and remove the boom mic as you like. The pivoting metal boom arm and flexible gooseneck adjust easily for optimal positioning, while the highly directional hypercardioid microphone element works to reject ambient noise so your voice comes through loud and clear. You can also use the included windscreen to reduce breath noise.
The boom mic’s 3.0 m (9.8') cable features an inline mute control, and it can be conveniently tethered to the headphones’ cable using the included cable clips and hook-and-loop fastener. The ATGM2 also comes with a Y-type stereo adapter that converts the separate mic and headphone connectors to a single 3.5 mm(1/8") 4-pole connector for Windows PC and PS4 gaming.
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Hypercardioid
Frequency Response: 100 – 16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 2,100 ohms
Power Requirements: Plug-in power
Weight: 36 g (1.3 oz)
Dimensions: 15 mm (0.59") H x 16 mm (0.63") D x 160 mm (6.30") L
Output Connector: 3.5 mm (1/8") gold-plated stereo mini-plug (3-pole)
Cable: 3.0 m (9.8')
Accessories Furnished: Y-type stereo headset adapter; cable clip (x 3); hook-and-loop fastener; double-sided tape dot (x 2); windscreen; pouch