ATM350

Please see the updated ATM350a Instrument Microphone Systems. Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

Microphone
Element	Fixed-charge back plate permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	40 - 20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level	149 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	122 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	67 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.5 mA typical
Switches	Flat, roll-off
Weight	Microphone: 14.5 g (0.5 oz) Power module: 81.2 g (2.9 oz)
Cable	4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
Dimensions	Microphone: 37.8 mm (1.49") long, 12.2 mm (0.48") diameter Power module: 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Output Connector	Power module: Integral 3-pin XLRM-type
Accessories Included	AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch