ATW-13
NULL

ATW-13

Out of Stock
ATW-13
  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews

Overview

ATW-13 NULL

ATW-13 AT-One Handheld Transmitter System - Simple to set up and use, 2 x 4 channel frequency plan for enhanced flexibility, Rack mountable for easy installation and Intuitive receiver and transmitter controls

Features

ATW-13

THE AT-ONE ENTRY LEVEL UHF SYSTEM, THE BEST EQUIPPED ON THE MARKET

AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-13 handheld system features the ATW-T3 cardioid condenser handheld transmitter, again with 10mW RF output and 10 hour battery life.

  • Designed for quick and easy use
  • Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
  • The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
  • Users can choose up to 4 channels in a group
  • The ATW-13 system is equipped with a cardioid condenser handheld transmitter
  • RF transmission power 10mW
  • Up to 10 hours' battery life with 2 x 1.5V AA batteries
  • RF Indicator light
  • Robust construction from high quality components
  • Delivered in a transport case with a rack mount kit and detachable antennas

“2 X 4 Channels”

AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.

“rf light indicator”

The display on the half-rack receiver clearly indicates both the RF and AF levels.

“12v power”

The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.

delivered in a case

The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case.

easy to use

The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational.

cardioid condenser mic

The ATW-T3 cardioid condenser handheld microphone is included. This microphone prevents interference when used in places equipped with induction loops.

removable antennae

The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

Specifications

Overall System
Operating Frequencies F-Band: 824 - 831 MHz, 863 - 865 MHz
Modulation Mode FM
Frequency Response 60 Hz - 16 kHz
Frequency Stability +/- 0.005%, Phase lock loop frequency control
Operating Range 60m, typical
Number Of Channels 2 x 4 frequencies
Handheld Transmitter
RF Power Output 10 mW
Spurious Emissions Following national regulatios
Microphone Element Condenser Cardioid
Battery Type Two 1.5V AA alkaline
Battery Life 10 hours - depending on battery type and use pattern
Dimensions 268 mm long - 52 mm (diameter)
Accessories Included Stand clamp
Receiver
Receiving System Antenna switching diversity
Image Rejection 55dB minimum
Sensitivity 10dBµV (S/N 60dB @ 20 kHz deviation)
Maximum Output Level Mic / Line (0 / -20dB)
Antenna Input BNC type, 50 - BIAS voltage 12V DC 100mA each
Dimensions 200 mm x 42 mm x 122 mm (W x H x D)
Weight 418 g without accessories
Accessories Included AC Adapter, Antennas, Rack mount adapter, protective carrying case
Audio Output Balanced 4dBV
Audio Output Unbalanced -2dBV
Dynamic Range HH: 108 dB, BP 103 dB (@ max deviation)
Output Connectors (Instrument) Unbalanced: 6.3 mm mono jack
Output Connectors (Microphone) Balanced: XLRM-type
Total Harmonic Distortion <1% - 20 kHz deviation @ 1 kHz

Reviews

Downloads

Declaration of Conformity
AT-One Specification Sheet
AT-One Owners Manual