Discontinued
5000 Series body-pack transmitter with cH-style screw-down 4-pin connector
ATW-T5201
ATW-T5201
Features
- Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power
- Rugged cH-style connector provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector
Specifications
Overall System | |
---|---|
Minimum Frequency Step | 25 kHz |
Modulation Mode | FM |
Maximum Deviation | ATW-T5201: ±40 kHz (THD:10%) ATW-T5202: ±40 kHz (THD:10%) |
Frequency Response | ATW-T5201: 23 Hz to 16,300 Hz ATW-T5202: 33 Hz to 16,300 Hz Frequency response depends on attached microphone element |
Operating Range | 100 m (328') Open range environment with no interfering signals. |
Total Harmonic Distortion | <1.0% (at 1 kHz, ±17.5 kHz deviation) |
Handheld Transmitter | |
---|---|
RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2mW (switchable), at 50 ohms (country dependent) |
Spurious Emissions | Following Federal and National Regulations |
Battery Type | Two 1.5V AA, not included |
Battery Life | High: 6.5 hours Mid: 8 hours Low: 9.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
Dimensions | ATW-T5202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter ATW-T5202/C510: 265mm (10.43") long, 54 mm (2.13") maximum diameter ATW-T5202/C710: 271mm (10.67") long, 50 mm (1.97") maximum diameter |
Net Weight | ATW-T5202 (without capsule): 200g (7.1oz) ATW-T5202/C510: 330g (11.6oz) ATW-T5202/C710: 314g (11.1oz) (without batteries) |
Accessories Included | AT8456a Quiet-Flexâ„¢ stand clamp (5/8"-27 male to 3/8"-16 female threaded screw adapter); AT-BG3 Protective Carrying Case |
Body Pack | |
---|---|
RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2mW (switchable), at 50 ohms (country dependent) |
Battery Life | High: 7 hours Mid: 9 hours Low: 10.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
Battery Type | Two 1.5V AA, not included |
Dimensions | 62 mm x 70 mm x 17 mm (W x D x H) 2.44" x 2.75" x 0.67" (W x D x H) |
Input Connections | Four Pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +10V |
Net Weight | 92 g (3.2 oz), without batteries |
Spurious Emissions | Following Federal and National Regulations |
Receiver | |
---|---|
Receiving System | True Diversity |
Image Rejection | 80 dB nominal |
Maximum Output Level | XLR, balanced: +18 dBV |
Headphone Output | Headphone Output Connector: 6.3 mm (1/4") TRS Stereo Headphone Output Power: 180 mW, typical |
Antenna Input | BNC-type, 50 ohms |
Power Supply | 100-240VAC 50/60Hz |
Dimensions | 482.0 mm x 361.0 mm x 43.0 mm (W x D x H) 18.98" x 14.21" x 1.69" (W x D x H) |
Weight | 4800 g (169.3 oz), without accessories |
Accessories Included | Two Flexible UHF antennas; Power Cable (country dependent); Legs x4 (4 mounting screws) |
Downloads
SOFTWARE DOWNLOAD
SOFTWARE DOWNLOAD
RELEASE NOTES
AT-BG3 Dimensions
ATW-T5201 Input Diagram
ATW-T5201 Dimensions
WL Systems - Syslog Specifications
WL Systems - IP Control Protocol Specifications
5000 Series Specification Sheet
5000 Series User Manual (en)
5000 Series Quick Start Guide
5000 Series User Manual (it)
5000 Series User Manual (pt)
5000 Series User Manual (ru)