5000 Series handheld microphone/transmitter body


  • Overview
  • Gallery
  • Features
  • Specifications



5000 Series handheld microphone/transmitter body (handle only, capsule sold separately) with industry-standard thread mount for use with ATW-C510, ATW-C710, ATW-C4100, ATW-C6100, ATW-C3300, and ATW-C5400 interchangeable wireless microphone capsules (or other compatible capsules). Includes AT8456a Quiet-Flex stand clamp.


  • Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
  • Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power
  • Features high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low-handling noise


Overall System
Operating Frequencies Band DE1: 470.125 to 590.000 MHz
Band EG1: 580.000 to 699.875 MHz
Band GH1: 700.125 to 819.875 MHz
Note that some frequency bands might not be available in country or region in which you live, or could come with a
Minimum Frequency Step 25 kHz
Modulation Mode FM
Maximum Deviation ±40 kHz (THD:10%)
Frequency Response 33 to 16,300 Hz Depending on attached microphone element.
Operating Range 100 m (328') Open range environment with no interfering signals.
Dynamic Range 116 dB or higher (A-weighted), typical
Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range -5°C to +45°C
Handheld Transmitter
RF Power Output High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Spurious Emissions Following federal and national regulations
Microphone Element Interchangeable industry standard thread
Battery Type Two 1.5V AA, not included
Battery Life High: 6.5 hours, Mid: 8 hours, Low: 9.5 hours (alkaline) Depending on battery type, usage and environmental conditions.
Dimensions 193 mm long, 37 mm maximum diameter
Net Weight 200 g
Accessories Included AT8456a Quiet-Flex™ stand clamp (5/8"-27 male to 3/8"-16 female threaded screw adapter), Protective carrying case (AT-BG3)


AT-BG3 Dimensions
ATW-T5202 Dimensions
WL Systems - Syslog Specifications
WL Systems - IP Control Protocol Specifications
5000 Series Specification Sheet
5000 Series User Manual (en)
5000 Series Quick Start Guide
5000 Series User Manual (it)
5000 Series User Manual (pt)
5000 Series User Manual (ru)