BP898
Subminiature Cardioid Condenser Lavalier Microphone

BP898

BP898
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

BP898

The BP898 is a low-profile lavalier cardioid condenser available with terminations for wired or wireless use. The microphone’s wide dynamic range and tolerance for high sound pressure levels ensures intelligible, natural-sounding audio that’s ideal for use by stage and television talent, lecturers, and worship leaders.

The directionality of the BP898 cardioid element has a pronounced proximity effect when used at close range, enhancing the user’s voice. This low-frequency enhancement drops off when the microphone is used at a distance. If the mic needs to be used at a greater distance or a less focused pickup is desired, the BP899 with an omnidirectional capsule is recommended.

The mic’s cable is made of a robust urethane elastomer that provides ultimate flexibility and strength, while resisting abrasion and moisture. The mic comes with a clothing clip that features two strain-relief points that isolate the mic from mechanical noise transferred over the cable. Two included windscreens each feature a clasp that secures the windscreen to the mic, preventing it from blowing off in critical situations, such as at sporting events.

Available wired and wireless models:

BP898 – 55" (1.4 m) permanently attached cable terminated with a cH-style screw-down 4-pin connector; AT8545 power module (with 80 Hz high-pass filter) for phantom power.

BP898c – 55" (1.4 m) permanently attached cable (unterminated); no power module. 

BP898cH – 55" (1.4 m) permanently attached cable terminated with a screw-down 4-pin connector for use with Audio-Technica cH-style body-pack wireless transmitters; no power module. 

BP898cW – 55" (1.4 m) permanently attached cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack wireless transmitters; no power module.

Features

  • Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and worship leaders
  • Cardioid capsule provides directional pickup with pronounced proximity effect at close range that enhances the user’s voice
  • Low-profile design (a mere 5.3 mm in diameter) is ideal for applications requiring minimum visibility
  • Urethane elastomer cable with a double-spiral shield wire provides ultimate flexibility, strength, and resistance to abrasion and moisture
  • RoHS compliant – free from all substances specified in the EU directive on hazardous substances
  • The microphone capsule is housed in a rugged metal structure to shield the electronic circuitry from external electromagnetic noise
  • The signal line of the cable is made of a high-durability CuSn (copper and tin) alloy that greatly enhances corrosion resistance and increases longevity
  • Two included windscreens each feature a plastic structure that keeps the windscreen secured to the microphone
  • Clothing clip includes 16 distinct angle adjustments over 360° and two strain-relief clips for easy cable routing

Specifications

Microphones
Element Fixed‐charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 270‐17,000 Hz (50 cm (1.64')), 60‐17,000 Hz (10 cm (0.33'))
Low Frequency Roll Off 80 Hz, 18 dB/octave (wired only)
Open Circuit Sensitivity ‐42 dB (7.9 mV) (0 dB=1 V/Pa, 1 kHz)
Impedance 250 ohms (wired only)
Maximum Input Sound Level 140 dB SPL (1 kHz at 1% THD)
Noise 28 dB SPL (A‐weighted)
Dynamic Range 112 dB (1 kHz at Max SPL)
Signal-to-Noise Ratio 66 dB (1 kHz at 1 Pa, A‐weighted)
Phantom Power Requirements 11V‐52V DC, 2 mA (wired only)
Switches Low cut: on/off (wired only)
Weight 1.6 g (0.06 oz) (Microphone body)
Cable 1.4 m (4.6')
Dimensions 22.3 mm (0.88") long, 5.3 mm (0.21") diameter (Microphone body)
Output Connector Terminated with cW-style locking 4-pin connector, terminated with cH-style screw-down 4-pin connector, unterminated
Accessories Included Clothing clip base (AT8461a, AT8461a-TH), Windscreens (AT8151a, AT8151a-TH), Case, Power Module (wired only) (AT8545)

Downloads

BP898 User Manual
BP898 Specification Sheet