BPHS1
divider-line Broadcast Stereo Headset

BPHS1

carrat-down
BPHS1
    divider-line
  • Overview
  • Gallery
  • Features
  • Specifications
divider-line

Overview

BPHS1

Created especially for on-air news & sports broadcasting, announcing & interviews, this rugged stereo headset offers natural, highly intelligible and focused vocal reproduction, closed-back circumaural (around-the-ear) ear cups to seal out background noise, and a high-output dynamic microphone mounted on a flexible gooseneck boom. The headset’s microphone has a cardioid polar pattern tailored for pickup of speech with maximum voice intelligibility over a wide range of frequencies. It is more sensitive to sound originating directly in front of the element, making it useful in reducing pickup of unwanted sounds. The flexible gooseneck boom swivels for easy positioning on either the right or left side.

Features

  • Microphone features polar pattern and frequency response tailored for natural, highly intelligible vocal reproduction
  • Closed-back circumaural ear cups help seal out crowd noise and other background distractions
  • Neodymium magnets in microphone and headphones for high output level & detailed sound reproduction
  • Cardioid pickup pattern of the dynamic microphone rejects off-axis sounds
  • Boom-mounted microphone can be positioned on the left or right side
  • Adjustable cushioned headband and lightweight design for long-wearing comfort
  • Rugged design with user-replaceable cable and ear pads
  • BPHS1 - Includes detachable cable (BPCB1) that terminates in 3-pin XLRM-type connector for microphone and ¼" 3-conductor for headphone
  • BPHS1-XF4 - Includes detachable cable (BPCB4) terminates in 4-pin XLRF-type connector for use with intercom systems

Specifications

Headphones
Type Closed-back Dynamic (Headphone) Cardioid Dynamic (Microphone)
Driver Diameter 40 mm (Headphone)
Frequency Response 20-20,000 Hz (Headphone) 40-20,000 Hz (Microphone)
Maximum Input Power 1,600 mW at 1 kHz
Sensitivity 100 dB (Headphone) -57 dB (1.4 mV) re 1V at 1 Pa (Microphone)
Impedance 65 ohms (Headphone) 560 ohms (Microphone)
Weight 264 g (9.3 oz)
Cable 3.3 m (10.8') long with 8-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") phone plug (headphone) outputs
Magnet Neodymium (Headphone)
Voice Coil Copper-clad aluminum wire
Accessories Included 3 windscreens; spare connector screw

Downloads

BPHS1 Frequency Response
BPHS1 Literature Sheet
BPHS1 Polar Pattern
BPHS1 Specification Sheet
BPHS1-XF4 Declaration of Conformity
BPHS1-XF4 Submittal Sheet