AT-MONO3/LP
divider-line Dual Moving Coil Cartridge

AT-MONO3/LP

Out of Stock
AT-MONO3/LP
    divider-line
  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews
divider-line

Overview

AT-MONO3/LP

20-20,000 Hz
AT-MONO3/LP

Features

The AT-MONO3/LP is a high-output (1.2 mV) moving coil cartridge designed specifically for use with mono vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT-MONO3/LP cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The voice coils are wired in series, resulting in one mono signal that is transmitted to the cartridge’s white-blue terminals and red-green terminals in order to feed both inputs of a stereo phono preamp. The cartridge’s low-mass 0.6 mil conical stylus is mounted on an aluminum cantilever for excellent tracking performance. Because the AT-MONO3/LP does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. The cartridge features a strong, rigid body of die-cast aluminum alloy and synthetic resin to eliminate unnecessary vibrations. * This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play mono microgroove 33-1/3 vinyl records.

Specifications

Cartridge & Stylus
Frequency Response 20 - 20,000Hz
Vertical Tracking Angle 23°
Vertical Tracking Force 1.5 to 2.5 g (standard 2.0 g)
Stylus Construction 0.6 mil
Recommended Load Impedance 400 to 47,000 ohms
Coil Impedance 40Ω (1kHz)
DC Resistance 40Ω
Coil Inductance 190 µH (1kHz)
Output Voltage 1.2 mV (at 1 kHz, 5.0 cm/sec)
Stylus Shape Conical
Cantilever Aluminium Pipe
Static Compliance 20×10-6cm/dyne
Dynamic Compliance 7×10-6cm/dyne (100Hz)
Mounting 1/2” centers
Dimensions 16.0 (H) x 16.6 (W) x 26.5 (L) mm
Accessories Included Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101
Body Material Aluminium/Synthetic Resin
Type Horizontal Mono Moving Coil
Weight 6.8g

Reviews

Downloads

Declaration of Conformity