ES945O/FM5
Omnidirectional Condenser Boundary Microphone with 5-Pin XLR Output and Remote Muting

ES945O/FM5

ES945O/FM5
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

ES945O/FM5 Omnidirectional Condenser Boundary Microphone with 5-Pin XLR Output and Remote Muting

This phantom-powered omnidirectional condenser boundary microphone features a 5-pin XLR output connector with a touch-sensitive capacitive-type user switch for enhanced control in conference and boardroom installations. Not only can the switch be configured to toggle between mute and live audio, but, with the microphone’s external contact closure, it can also be set up to trigger an external device, such as a camera or the room’s lighting.

Designed for clear, highly intelligible conferencing, recording, monitoring and other demanding sound pickup applications, the ES945O/FM5 mounts unobtrusively in tabletops or panels, but includes a highly visible two-state RGB LED ring (7 selectable colors + OFF) to keep users apprised of the status.

The microphone’s omnidirectional polar pattern provides 360° coverage. A rugged all-metal case with a two-layer steel mesh grille protects the microphone element, while our UniGuard® RFI-shielding technology provides outstanding rejection of radio frequency interference (RFI).

The ES945O/FM5 is equipped with a self-contained power module, eliminating the need for an external one, and comes with a pair of rubber isolators for optional mechanical isolation from the mounting surface.

 

See below for the entire family of ES945O and ES947C boundary microphones:

ES945O/XLR
Water-resistant Omnidirectional Condenser Boundary Microphone with XLR Output

ES947C/XLR
Water-resistant Cardioid Condenser Boundary Microphone with XLR Output

ES945O/TB3
Miniature Omnidirectional Condenser Boundary Microphone with TB3-to-XLR Output

ES947C/TB3
Miniature Cardioid Condenser Boundary Microphone with TB3-to-XLR Output

ES945O/FM3
Omnidirectional Condenser Boundary Microphone with 3-Pin XLR Output and Local Muting

ES947C/FM3
Cardioid Condenser Boundary Microphone with 3-Pin XLR Output and Local Muting

ES945O/FM5
Omnidirectional Condenser Boundary Microphone with 5-Pin XLR Output and Remote Muting

ES947C/FM5
Cardioid Condenser Boundary Microphone with 5-Pin XLR Output and Remote Muting

Features

  • Designed for surface-mount applications such as conferencing, recording, monitoring and other demanding sound pickup applications
  • Logic I/O capability permits control of remote devices from mic’s touch-sensitive capacitive-type user switch
  • Highly visible two-state RGB LED ring (7 selectable colors + OFF) indicates mic status
  • Low-profile element provides uniform omnidirectional polar pattern with 360° acceptance angle
  • Mounts unobtrusively in tabletops and panels
  • Self-contained power module with 5-pin XLR output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Rubber Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

Specifications

Microphone
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 60-15,000 Hz
Open Circuit Sensitivity -33 dB (0 dB = 1V/Pa, 1 kHz)
Output Impedance 60 ohms
Maximum Input Sound Level 130 dB SPL (1 kHz at 1% THD)
Dynamic Range (typical) 109 dB (1 kHz at max SPL)
Signal-to-Noise Ratio 73 dB (1 kHz at 1 Pa, A-weighted)
Phantom Power Requirements 11-52V DC, 6.8 mA
Weight 59 g (2.1 oz)
Dimensions 38.0 mm (1.50") W x 48.0 mm (1.89") D x 84.8 mm (3.34") H
Output Connector 5-pin XLRM-type
Accessories Included Rubber isolators (two types), nut

Downloads

ES945O/FM5 User Manual
ES945O/FM5 Quick Start Guide
ES945O/FM5 CAD Drawing