UHF Powered Wideband Antenna

ATW-A410P

Overview

ATW-A410P

Low-profile UHF antenna mounts to wall or ceiling
470-990 MHz operating range
4-position gain selector (-10 dB/0 dB/+6 dB/+12 dB)
LED gain setting indicator
BNC cable may be routed to the side, top or rear of the antenna
Includes mounting bracket and screws

Features

The ATW-A410P is a low-profile UHF (470-990 MHz) antenna that mounts to a wall or ceiling. It features a 4-position switchable amplifier (-10 dB/0 dB/+6 dB/+12 dB) to compensate for cable loss, along with an LED indicator to display the current gain setting. To accommodate various installation environments, the antenna’s BNC cable can be configured to exit from the top, side or rear of the antenna. Includes mounting bracket and screws. Specifications Frequency range: 470 to 990 MHz Connector: BNC-J Impedance: 50 ohms Power requirement: +12V DC, 60 mA or less OIP3: >30 dBm typical (within specified bandwidth) Gain: -10 dB/0 dB/+6 dB/+12 dB Operating temperature range: -10° C to 50° C (14° F to 122° F) Dimensions: 175 mm (6.9") W × 175 mm (6.9") D × 50 mm (2.0") H (without bracket) Weight: 390 g (13.8 oz) (without bracket) Accessories: Mounting bracket, screws

Specifications

Antenna & Distribution
Impedance	50 ohms typical (within specified bandwidth)
Gain	-10 dB / 0 dB / +6 dB / +12 dB
OIP3	> 30 dBm typical (within specified bandwidth)
Termination Type	BNC-J
Operating Bandwidth	470-990 MHz
Operating Temperature Range	-10℃ to 50℃
Dimensions	175 x 175 x 50 mm (without bracket)
Weight	390 g (without bracket)
Accessories	Mounting bracket, screws