Support Header Image


How to set up the Sound Burger

Proper set up of the AT-SB727 and AT-SB2022 turntables will ensure that it will perform at its full potential. Please follow the steps below for assistance.

Carefully remove the turntable from the package and verify that all parts and accessories are present. You should have the following items:


  • AT-SB727/AT-SB2022 Main Unit

  • USB charging cable

  • RCA audio cable

  • 45 RPM adapter


Removing the tonearm fixing screw

The product includes a screw for fixing the tonearm that needs to be removed before using the product. Safely store the removed screw and reinstall it when transporting the product.


Setting up the turntable


  • Position the product on a level surface. Do not attempt to use it in a vertical position.

  • To avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as speakers.

  • The product may pick up radio static if placed next to a radio. Therefore, try to keep the product away from radios.

  • If the product is near equipment (mobile phone, etc.) that emits strong radio waves, noise may occur.

  • Fully charge the battery when using for the first time using the USB cable provided and a commerically available standard USB power adapter (not included).





Bluetooth connections

This product supports Bluetooth connections and can be connected with Bluetooth-supporting devices such as headphones and speakers.

To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired, you do not need to pair them again. However, you will need to pair again in the following cases:


  • If the product is deleted from the Bluetooth device’s connection history.

  • If the product is sent out for repair.

  • If the product’s pairing history is reset.

  • If 9 or more devices are paired. - The product can be paired with up to 8 devices. When you pair with a new device after pairing with 8 devices, pairing information for the device with the oldest connection date will be overwritten by the information for the new device.


Pairing a Bluetooth device

Before pairing it may be necessary to read the user manual for your Bluetooth device.


  • Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.

  • Disconnect the RCA audio cable. Connecting the RCA audio cables while connected via Bluetooth will switch to a wired connection.

  • Turn on the product.

  • Press and hold the product’s wireless function button (for about 2 seconds).

  • The product will start searching for devices and the power supply indicator lamp will start flashing quickly in white.

  • Set the Bluetooth your device to the pairing mode.

  • Once paired, the power supply indicator lamp will change to slowly flashing in white.


The product’s pairing mode will automatically end after about 60 seconds. If pairing cannot be completed normally, try pairing again using the same procedure.


Wired connections

You may wish to use a wired connection using the supplied RCA audio cable to connect your AT-SB2022 to your speakers. The Sound Burger outputs at line level so doesn't require an external phono stage. Do not connect it to a phono input on a stereo amplifier.

Connect the RCA audio cable (red is the right channel, white is the left) to the input jacks of the connectable equipment you are using (amplifier, receiver, active speakers, sound card, etc.).


  • If you are using powered speakers the RCA cable should be connected directly into them




  • If connecting to passive speakers, then a separate amplifier is required. Connect the RCA cable to a line level input, such as Aux, CD, Tuner etc.


The AT-SB727 and AT-SB2022 don't have an integral volume control. Use the volume controls on your amplifier/speakers.


Moving the Sound Burger

Please note that the turntable cannot be moved while in use. Before moving, remove the record and store the tonearm and 45 RPM adapter. Always make sure to hold the carrying handle firmly and do not swing the turntable. Install the tonearm fixing screw when transporting.

For playback instructions please refer to the user manual. If you have any further questions please contact us for further assistance.