Discontinued
Moving Coil Cartridge
AT-OC9ML/II
£400.00
Out of Stock
AT-OC9ML/II
Features
AT-oc9ml/ii
Moving Coil Cartridge
The AT-OC9ML/II Dual Moving MicroCoil™ cartridge is a significant achievement in precision manufacturing, with tolerances held to mere thousandths of an inch. Stringent quality control assures that these tolerances, as well as performance criteria, are maintained by every AT-OC9ML/II cartridge. In addition, the AT-OC9ML/II features:
- Dual-coil system for maximum channel separation.
- High-flux samarium cobalt magnet for improved electrical generation.
- PCOCC coil windings for low-loss “transparent” signal transmission.
- Gold-plated solid boron cantilever.
- Microlinear stylus
“Enables purer transmission”
The PCOCC coil enables purer transmission because it is not subject to grain boundaries in the direction of transmission.
“maximum channel separation”
Dual-coil system for maximum channel separation.
Specifications
| Cartridge & Stylus | |
|---|---|
| Frequency Response | 15 - 50,000Hz |
| Channel Separation | 31dB (1kHz) |
| Vertical Tracking Angle | 23° |
| Stylus Construction | Nude Square Shank |
| Recommended Load Impedance | Min 100Ω |
| Coil Impedance | 12Ω (1kHz) |
| DC Resistance | 12Ω |
| Coil Inductance | 25µH (1kHz) |
| Output Voltage | 0.4mV (1kHz and 5cm/sec.) |
| Output Channel Balance | 1.0dB (1kHz) |
| Stylus Shape | Microlinear |
| Cantilever | Gold-plated solid boron |
| Static Compliance | 35×10-6cm/dyne |
| Dynamic Compliance | 9×10-6cm/dyne (100Hz) |
| Mounting | 1/2” centers |
| Dimensions | 17.3 (H) x 16.8 (W) x 25.7 (L) mm |
| Accessories Included | 1 non magnetic screw driver; 1 brush; 2 washers; 2 x 13.5 mm mounting screws; 2 x 18 mm mounting screws; 1 plastic protector; |
| Body Material | Aluminium |
| Stylus Curvature Radius | MicroLinear™ |
| Type | Dual Moving Coil |
| Weight | 8.0g |
Reviews
Downloads
AT-OC9ML/II User Manual
Declaration of Conformity