Cardioid Condenser Instrument Microphone w/ Surface Mounting System (Long)


  • Overview
  • Gallery
  • Features
  • Specifications


ATM350SL Cardioid Condenser Instrument Microphone with Surface Mounting System (Long)

Cardioid Condenser Instrument Microphone w/ Surface Mounting System (Long)


The ATM350a is the ultimate microphone solution for discreet, rock-solid mounting on your instrument of choice, from Piano to 20-piece Drum Kit. Offering a crisp, clear, well-balanced response, even at extreme SPLs, the ATM350a is ready to capture your sound, whatever instrument you choose. The surface mount is designed for accordions and other challenging applications. The notched mount can be attached permanently using the accordion’s grille screw and the included adhesive silicon pad, or it can be attached temporarily using the included fastener tape pads. A transparent protective film is also included to prevent damage to the instrument’s finish.The ATM350SL Cardioid Condenser Instrument Microphone w/ Surface Mounting System includes: ATM350a microphone, AT8490L gooseneck, AT8491S surface mount, AT8475 surface mounting kit, AT8543 power module, AT8468 velcro mount and a hard carrying case


Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40 – 20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11– 52V DC, 3.5 mA typical
Switches Flat, roll-off
Weight Microphone: 14.5 g
Power Module: 90 g
Cable 4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Dimensions Microphone: 37.8 mm long, 12.2 mm maximum body diameter
Power Module: 92 mm long, 18.9 mm diameter
Output Connector Power Module: Integral 3-pin XLRM-type
Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491S UniMount® surface mount; AT8490L UniMount® 9" gooseneck; AT8475 surface mounting kit, AT8468 violin mount (hook-and-loop fastener); protective carrying


ATM350a User Manual (Multi-lang)