Cardioid Condenser Instrument Microphone w/ Woodwind Mounting System


  • Overview
  • Gallery
  • Features
  • Specifications


ATM350W Cardioid Condenser Instrument Microphone with Woodwind Mounting System

Cardioid Condenser Instrument Microphone w/ Woodwind Mounting System


The ATM350a is the ultimate microphone solution for discreet, rock-solid mounting on your instrument of choice, from Piano to 20-piece Drum Kit.

Offering a crisp, clear, well-balanced response, even at extreme SPLs, the ATM350a is ready to capture your sound, whatever instrument you choose.

The AT8491W woodwind mount allows for easy fitting to a wide range woodwind instruments

The ATM350W Cardioid Condenser Instrument Microphone w/ Woodwind Mounting System includes: ATM350a microphone, AT8490 gooseneck, AT8491W woodwind mount, AT8543 power module, AT8468 velcro mount and a hard carrying case


Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40 – 20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11– 52V DC, 3.5 mA typical
Switches Flat, roll-off
Weight Microphone:
14.5 g (0.5 oz)

Power Module:
90 g (3.2 oz)
Dimensions Microphone:
37.8 mm (1.49'') long,
12.2 mm (0.48'') maximum body diameter

Power Module:
92 mm (3.62") long,
18.9 mm (0.74") diameter
Output Connector Power Module:
Integral 3-pin XLRM-type
Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491W UniMount® woodwind mount; AT8490 UniMount® 5" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case


Declaration of Conformity
ATM350 Manual (Multi Language)
ATM350 Mic Specification
ATM350 Launch Information (ENG)