Beamforming Ceiling Array Microphone
ATND1061
ATND1061
Features
- The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small
- Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ
- User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings
- Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types
- Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants
- Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations
- Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling
- Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)
- Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)
- Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount
- UL 2043 compliant for installation in plenum spaces
- Includes tile bridge, safety wiring, and mounting hardware and accessories
- Low-reflective white finish matches ceiling tiles in most environments
- Powered by network PoE
Specifications
Microphone | |
---|---|
Beam Width | 90-degrees |
Polar Pattern | Beam pattern |
Frequency Response | 60 Hz to 18,000 Hz |
Maximum Input Sound Level | 102 dBSPL |
Sensitivity | -8 dBFS (1 kHz, 94 dBSPL) |
Dynamic Range | 89 dB (A-weighted) |
Signal-to-Noise Ratio | 61.5 dB (A-weighted) |
Self-Noise | 25 dBSPL (A-weighted) |
Analog Audio | |
---|---|
Frequency Response | 20 Hz to 20 kHz (+1.0/-2.0 dB) |
Dynamic Range | 100 dB (A-weighted) |
Signal to Noise Ratio | 80 dB (A-weighted) |
Headroom | 20 dB |
Residual Noise | -75.8 dBu (A-weighted) |
T.H.D | <0.1% (1 kHz, unity) |
Analog Input | MIC Maximum: -30 dBu MIC Unity: -50 dBu LINE Maximum: +12.2 dBu LINE Unity: -10 dBV, Switchable |
Analog Output | OUTPUT Maximum: +19.2 dBu OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable |
General Specifications - Beamforming Array | |
---|---|
Power Requirement | PoE (IEEE 802.3af Class 0) |
Power Consumption | Max. 7 W |
Operation Temperature Range | 0°C to 40°C (32°F to 104°F) |
Operation Humidity Range | 25% to 85% (Non condensing) |
Dimensions | 227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) (W × D×H) |
Weight | 1250 g (44 oz) |
Network | Dante: 1 Gbps IP control: 100 Mbps |
Digital Audio | Sampling rate: 48 kHz Bit depth: 24 bit |
Latency | Microphone (CH1 to CH6): 47 msec Microphone (Auto Mix CH): 79 msec Dante: Min. 250 usec, Max. 5 msec |
I/O Connector | Network/Dante: RJ-45 Analog input: Euroblock 3 pin Analog output: Euroblock 3 pin GPI: Euroblock 3 pin |
Phantom Power | Analog input: 12 V |
Included Accessories | ・IR remote controller ・Surface mount adapter ・Screw (M4 × 50 mm) × 4 ・Flush mount adapter ・Flush mount cover ・Screw (M4 × 10 mm) × 12 ・Hole cover ・Nut × 4 ・Snap bushing × 2 ・Tile bridge A × 2 ・Tile bridge B × 2 ・Tile bridge C × 4 ・Seismic cable ・Zip tie ・Safety belt ・Euroblock connector × 3 ・Installation template |
Downloads
Pre-Sale Information
Manuals
ATND1061 User Manual EN
ATND1061 User Manual FR
ATND1061 User Manual DE
ATND1061 User Manual ES
ATND1061 User Manual IT
ATND1061 User Manual PT
ATND1061 User Manual RU
Digital Microphone Manager User Manual EN
Digital Microphone Manager User Manual FR
Digital Microphone Manager User Manual DE
Digital Microphone Manager User Manual ES
Digital Microphone Manager User Manual IT
Digital Microphone Manager User Manual PT
Digital Microphone Manager User Manual RU
ATND1061 Quick Start Guide
Additional Operating Instructions
IP Control Specifications
Software
CAD Dimensional Drawing