ATM350SL
Features
The ATM350a is the ultimate microphone solution for discreet, rock-solid mounting on your instrument of choice, from Piano to 20-piece Drum Kit. Offering a crisp, clear, well-balanced response, even at extreme SPLs, the ATM350a is ready to capture your sound, whatever instrument you choose. The surface mount is designed for accordions and other challenging applications. The notched mount can be attached permanently using the accordion’s grille screw and the included adhesive silicon pad, or it can be attached temporarily using the included fastener tape pads. A transparent protective film is also included to prevent damage to the instrument’s finish.The ATM350SL Cardioid Condenser Instrument Microphone w/ Surface Mounting System includes: ATM350a microphone, AT8490L gooseneck, AT8491S surface mount, AT8475 surface mounting kit, AT8543 power module, AT8468 velcro mount and a hard carrying case
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Cardioid |
Frequency Response | 40 – 20,000 Hz |
Low Frequency Roll Off | 80 Hz, 12 dB/octave |
Open Circuit Sensitivity | –49 dB (3.5 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 159 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 130 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11– 52V DC, 3.5 mA typical |
Switches | Flat, roll-off |
Weight | Microphone: 14.5 g Power Module: 90 g |
Cable | 4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector |
Dimensions | Microphone: 37.8 mm long, 12.2 mm maximum body diameter Power Module: 92 mm long, 18.9 mm diameter |
Output Connector | Power Module: Integral 3-pin XLRM-type |
Accessories Included | ATM350a cardioid condenser microphone; AT8543 power module; AT8491S UniMount® surface mount; AT8490L UniMount® 9" gooseneck; AT8475 surface mounting kit, AT8468 violin mount (hook-and-loop fastener); protective carrying |