Cardioid Condenser Clip-on Instrument Microphone

PRO35

Overview

PRO35 Cardioid Condenser Clip-on Instrument Microphone

Designed for sax, toms, brass, and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included AT8418 UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Available configurations:

PRO 35: 6' (1.8 m) permanently attached miniature cable terminated with a TA3F connector for use with the included AT8538 phantom power only in-line power module (80 Hz high-pass filter).

PRO 35cH: 55" (1.4 m) permanently attached miniature cable terminated with a screw-down 4-pin connector for use with Audio-Technica cH-style body-pack wireless transmitters.

PRO 35cW: 55" (1.4 m) permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack wireless transmitters.

Features

UniMount® clip permits accurate positioning, provides shock resistance and protects element
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Extended frequency response captures subtle nuances of the performance
6' (1.8 m) cable permanently attached to microphone

Specifications

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	50-15,000 Hz
Low Frequency Roll Off	80 Hz, 18 dB/octave (wired only)
Open Circuit Sensitivity	-45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level	145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	115 dB, 1 kHz at Max SPL (wired only)
Signal-to-Noise Ratio	64 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 2 mA typical (wired only)
Switches	Flat, roll-off (wired only)
Weight (microphone)	0.3 oz (8 g)
Weight (power module)	2.9 oz (81 g) (wired only)
Cable	6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable
Dimensions (power module)	3.66" (92.9 mm) long,0.74" (18.9 mm) diameter (wired only)
Dimensions (microphone)	0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
Output Connector (power module)	Integral 3-pin XLRM-type (wired only)
Accessories Included	AT8418 UniMount® microphone instrument mount; AT8538 power module (wired only); soft protective pouch
Audio-Technica Case Style	M12

Downloads

PRO35 Declaration of Conformity

PRO35 Frequency Response

PRO35 Polar Pattern

PRO35 Specification Sheet

PRO35cW Declaration of Conformity

PRO35cW Polar Pattern

PRO35cW Frequency Response