+9
Features
- Dual-channel receiver provides 230 MHz UHF tuning bandwidth (DG1 470-700 MHz) for maximum versatility in an ever-congested RF environment
- Antenna cascade output allows 8 receivers to be connected so that a single pair of antennas can feed up to 16 channels of wireless. These connectors also provide a simple RF cable check feature to aid in RF troubleshooting
- Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
- Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality
- The full-rack receiver chassis holds two independent receivers, and offers antenna power, frequency scan and IR sync functionality, a ground-lift switch, and a front-panel headphone jack
- Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering
- Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN)
- Both transmitters are available in two bands – DE1 (470–590 MHz) and EG1 (580–700 MHz) – and offer rugged, ergonomic metal bodies, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power
- Handheld transmitter features a high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low-handling noise
- New rugged cH-style connector on body-pack transmitter provides a secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector
- Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display
- Wireless network monitoring and control software
- 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility
Specifications
| Overall System | |
|---|---|
| Minimum Frequency Step | 25 kHz |
| Modulation Mode | FM |
| Maximum Deviation | ATW-T5201: ±40 kHz (THD:10%) ATW-T5202: ±40 kHz (THD:10%) |
| Frequency Response | ATW-T5201: 23 Hz to 16,300 Hz ATW-T5202: 33 Hz to 16,300 Hz Frequency response depends on attached microphone element |
| Operating Range | 100 m (328') Open range environment with no interfering signals. |
| Total Harmonic Distortion | <1.0% (at 1 kHz, ±17.5 kHz deviation) |
| Handheld Transmitter | |
|---|---|
| RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2mW (switchable), at 50 ohms (country dependent) |
| Spurious Emissions | Following Federal and National Regulations |
| Battery Type | Two 1.5V AA, not included |
| Battery Life | High: 6.5 hours Mid: 8 hours Low: 9.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
| Dimensions | ATW-T5202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter ATW-T5202/C510: 265mm (10.43") long, 54 mm (2.13") maximum diameter ATW-T5202/C710: 271mm (10.67") long, 50 mm (1.97") maximum diameter |
| Net Weight | ATW-T5202 (without capsule): 200g (7.1oz) ATW-T5202/C510: 330g (11.6oz) ATW-T5202/C710: 314g (11.1oz) (without batteries) |
| Accessories Included | AT8456a Quiet-Flex™ stand clamp (5/8"-27 male to 3/8"-16 female threaded screw adapter); AT-BG3 Protective Carrying Case |
| Body Pack | |
|---|---|
| RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2mW (switchable), at 50 ohms (country dependent) |
| Battery Life | High: 7 hours Mid: 9 hours Low: 10.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
| Battery Type | Two 1.5V AA, not included |
| Dimensions | 62 mm x 70 mm x 17 mm (W x D x H) 2.44" x 2.75" x 0.67" (W x D x H) |
| Input Connections | Four Pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +10V |
| Net Weight | 92 g (3.2 oz), without batteries |
| Spurious Emissions | Following Federal and National Regulations |
| Receiver | |
|---|---|
| Receiving System | True Diversity |
| Image Rejection | 80 dB nominal |
| Maximum Output Level | XLR, balanced: +18 dBV |
| Headphone Output | Headphone Output Connector: 6.3 mm (1/4") TRS Stereo Headphone Output Power: 180 mW, typical |
| Antenna Input | BNC-type, 50 ohms |
| Power Supply | 100-240VAC 50/60Hz |
| Dimensions | 482.0 mm x 361.0 mm x 43.0 mm (W x D x H) 18.98" x 14.21" x 1.69" (W x D x H) |
| Weight | 4800 g (169.3 oz), without accessories |
| Accessories Included | Two Flexible UHF antennas; Power Cable (country dependent); Legs x4 (4 mounting screws) |
Reviews
Downloads
Manual
Software & Firmware
Visit our downloads page for the most up-to-date software and firmware.
If you require assistance identifying the correct software/firmware or need help with installation then please contact us.
