Discontinued
Dual Moving Magnet stereo Phono cartridge with conical Diamond Stylus
AT91R
32,00 €
Épuisé
AT91R
Aperçu
AT91R
Dual Moving Magnet stereo Phono cartridge with conical Diamond Stylus
Description
AT91R
Dual Moving Magnet stereo Phono cartridge with conical Diamond Stylus
The AT91R is a logical improvement of the popular AT91 phono cartridge, featuring an aluminium cantilever used on higher performance cartridges offers a product presenting excellent value for money.
Features include Dual V Mount magnet design and conical diamond stylus. The dual V Mount magnet configuration delivers excellent channel separation and low distortion resulting in outstanding tonal quality. As with all the AT90 Series cartridges the AT91R features ½” geometry and can be mounted on virtually any tonearm or headshell. The AT91R has been chosen by our engineers as the standard cartridge supplied on the Audio-Technica turntable AT-LP3.
Plus d'infos
| Cartridge & Stylus | |
|---|---|
| Réponse en Fréquence | 20 - 20,000 Hz |
| Séparation des Canaux | 18 dB at 1kHz |
| Angle de Piste Vertical | 20° |
| Fixation du Diamant | Bonded Round Shank |
| Impédance de Charge Recommandée | 47,000 ohms |
| Inductance de la Bobine | 400mH (1 kHz) |
| Tension de Sortie | 3.5 mV (mV at 1 kHz, 5 cm/sec) |
| Equilibre des Canaux en Sortie | 2.5 dB |
| Type de Diamant | Conical |
| Cantilever (levier porte-pointe) | Aluminium Pipe |
| Compliance Statique | 20 x 10-6 cm/dyne |
| Compliance Dynamique | 6.5x10-6cm/dyne (100Hz) |
| Montage | Half-inch |
| Dimensions | H17.0×W16.8×D31.0mm |
| Capacité de Charge Recommandée | 100-200 pF |
| Pointe de Lecture de Remplacement | ATN91R |
| Taille du Diamant | 0.6 mil |
| Type de cellule | VM Dual Magnet |
| Poids | 5.0g |
Commentaires
Téléchargements
AT91R-Manual(Multi-Lang)