AT-ART9XI
Dual Moving Coil Cartridge

AT-ART9XI

AT-ART9XI
  • Aperçu
  • Galerie
  • Fonctionnalités
  • Spécifications
  • Commentaires

Aperçu

AT-ART9XI

Featuring a special line contact stylus on a 0.28 mm diameter solid boron cantilever, the AT-ART9XI replaces the AT-ART9 as Audio-Technica’s flagship magnetic core MC cartridge.

The “ART” in the model number stands for Audio-Technica Reference Transducer, a designation that we give only to our flagship phono cartridges. The specially designed magnetic circuit boasts an output voltage of 0.5 mV (1 kHz, 5 cm/sec), making the cartridge easy to use and capable of reproducing even the most delicate expressions, while also ensuring dynamic playback. The dual moving coils (fashioned from high-performance PCOCC wire) are aligned in an inverted V shape to provide high separation and wide response for clear sound localization and minimal distortion. Threaded cartridge mounting holes make installation to a headshell or integrated tonearm incredibly easy.

AT-ART9XI

Description

  • Audio-Technica’s flagship magnetic core moving coil cartridge

  • Dual moving coils are aligned in an inverted V shape, providing high separation and wide response for clear sound localization and minimal distortion

  • Special line contact stylus ensures faithful reproduction of the music signal, and the 0.28 mm diameter solid boron cantilever provides excellent response characteristics

  • Neodymium magnet and permendur yoke significantly increase magnetic energy

  • Specially designed magnetic circuit provides an output voltage of 0.5 mV (1 kHz, 5 cm/sec)

  • PCOCC coils ensure high-fidelity transmission

  • Machined aluminum base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability

  • Hybrid body of machined aluminum and high-rigidity plastic reduces undesirable parasitic resonance

  • Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm

Plus d'infos

Cartridge & Stylus
Réponse en Fréquence 20-50,000 Hz
Séparation des Canaux 30 (dB at 1 kHz)
Angle de Piste Vertical 20°
Vertical Tracking Force 1.6-2.0 g (1.8 g standard)
Fixation du Diamant Nude
Impédance de Charge Recommandée Min. 100 ohms (when head amplifier connected)
Impédance de la Bobine 12 ohms (1 kHz)
Résistance en Courant Continu 12 ohms
Inductance de la Bobine 25 µH (1 kHz)
Tension de Sortie 0.5 mV (1 kHz, 5 cm/sec.)
Equilibre des Canaux en Sortie 0.5 dB (1 kHz)
Type de Diamant Special line contact
Cantilever (levier porte-pointe) 0.28 mm diameter solid boron
Compliance Statique 25 x 10-6 cm/dyne
Compliance Dynamique 15 x 10-6 cm/dyne (100 Hz)
Montage Half-inch
Poids de la Cellule 8.5 g (0.30 oz)
Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.0 mm (0.98") D
Accessoires Fournis Non-magnetic screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush
Threaded Hole M2.6 x 2
Notes Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Commentaires