ATW-1102
divider-line System 10 Wireless Handheld Microphone System

ATW-1102

ATW-1102
    divider-line
  • Aperçu
  • Galerie
  • Fonctionnalités
divider-line

Aperçu

ATW-1102 System 10 Wireless Handheld Microphone System

ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.

Plus d'infos

Overall System
Bandes de Fréquences 2.4 GHz ISM band (2400 to 2483.5 MHz)
Réponse en Fréquence 20 Hz to 20 kHz Depending on microphone type
Portée de Fonctionnement 30 m (100') typical
Open range environment with no interfering signals
Distortion Harmonique Totale <0.05% typical
Température de Fonctionnement 0° C to +40° C (32° F to 104° F)
Battery performance may be reduced at very low temperatures
Handheld Transmitter
Puissance en Sortie 10 mW
Emissions Parasites Following federal and national regulations
Type de Pile Two 1.5V AA not included
Durée de vie des piles >7 hours (alkaline) Depending on battery type and use pattern
Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Poids 280 grams (9.9 oz) without batteries
Accessoires Fournis AT8456a Quiet-Flex™ stand clamp
Body Pack
Puissance en Sortie 10 mW
Durée de vie des piles >7 hours (alkaline) Depending on battery type and use pattern
Type de Pile Two 1.5V AA not included
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Connecteurs en Entrée Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Poids 100 grams (3.5 oz) without batteries
Emissions Parasites Following federal and national regulations
Receiver
Système Récepteur Diversity (frequency/time/space)
Niveau de Sortie Maximal XLR, balanced: 0 dBV
1/4" (6.3 mm), unbalanced: +6 dBV
Alimentation 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
Poids 290 grams (10.2 oz)
Accessoires Fournis Power supply