ATM350S
Cardioid Condenser Instrument Microphone with Surface Mounting System (5" Gooseneck)

ATM350S

ATM350S
  • Aperçu
  • Galerie
  • Fonctionnalités
  • Spécifications

Aperçu

ATM350S

Designed for use with accordions and other instruments that are difficult to mike, the ATM350S UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.

When teamed with the included AT8491S surface mount and strong, flexible AT8490 5" gooseneck, the mic can be securely fastened to an accordion or other instrument with a challenging mounting surface and be positioned where you want it – the mic will stay in place no matter how much you move the instrument as you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

ATM350S

Description

  • Low-profile mic design for minimum visibility

  • Crisp, clear, well-balanced microphone response, even at high SPLs

  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

  • UniMount® surface mount attaches permanently or temporarily to an accordion or other instrument that is difficult to mike, providing excellent shock resistance for the microphone

  • Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play

  • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise

  • Interchangeable elements available for hypercardioid and omnidirectional polar patterns

  • Included violin mount with hook-and-loop fastener provides an additional mounting option

Plus d'infos

Microphones
Capsule Fixed-charge back plate, permanently polarized condenser
Directivité Cardioid
Réponse en Fréquence 40 – 20,000 Hz
Filtre coupe-bas 80 Hz, 12 dB/octave
Sensibilité –49 dB (3.5 mV) re 1V at 1 Pa
Pression Acoustique Maximale 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamique 130 dB, 1 kHz at Max SPL
Rapport Signal/Bruit 65 dB, 1 kHz at 1 Pa
Alimentation Fantôme 11– 52V DC, 3.5 mA typical
Commutateurs Flat, roll-off
Weight (microphone) 14.5 g (0.5 oz)
Weight (power module) 90 g (3.2 oz)
Câble 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Dimensions (power module) 92 mm (3.62") long, 18.9 mm (0.74") diameter
Dimensions (microphone) 37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter
Output Connector (power module) Integral 3-pin XLRM-type
Optional Interchangeable Elements UE-H hypercardioid (100°) UE-O omnidirectional (360°)
Accessoires Fournis ATM350a cardioid condenser microphone; AT8543 power module; AT8491S UniMount® surface mount; AT8475 surface mounting kit; AT8490 UniMount® 5" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
Boîte de Protection M36