Discontinued
Cardioid Condenser Headworn Microphone
BP894x
BP894x
Description
- Câble détachable
- Contour d'oreille sûr et confortable
- Supporte des niveaux de pression élevés
- Ultra léger et discret
- Support pour les deux oreilles inclus
- Disponible en noir et beige
Plus d'infos
Microphones | |
---|---|
Capsule | Fixed-charge back plate, permanently polarized condenser |
Directivité | Cardioid |
Réponse en Fréquence | 20-20,000 Hz |
Filtre coupe-bas | 80 Hz, 18 dB/octave (wired only) |
Sensibilité | -47 dB (4.3 mV) re 1V at 1 Pa |
Pression Acoustique Maximale | 135 dB SPL, 1 kHz at 3% T.H.D. |
Dynamique | 98 dB, 1 kHz at Max SPL (wired only) |
Rapport Signal/Bruit | 57 dB, 1 kHz at 1 Pa |
Alimentation Fantôme | 11-52V DC, 2 mA typical (wired only) |
Commutateurs | Flat, roll-off (wired only) |
Current Consumption | 0.25 mA typical at 5V (wireless only) |
Voltage Range | 3.5-10V (wireless only) |
Weight (microphone) | Microphone, boom & earpiece: 2.0 g (0.07 oz) |
Weight (power module) | 85 g (3.0 oz) (wired only) |
Câble | Detachable 1.4 m (55") long, 1.6 mm (0.06") diameter, 2- or 3-conductor shielded cable (termination dependent) |
Dimensions | Microphone: 9.67 mm (0.38") long, 2.6 mm (0.10") diameter Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter |
Dimensions (power module) | 100.0 mm (3.94") long, 18.9 mm (0.74") diameter (wired only) |
Output Connector (power module) | Integral 3-pin XLRM-type |
Boîte de Protection | M40 |
Téléchargements
BP894x Specification Sheet (EN)
BP894x Dimensions