Stack-mount Digital Wireless Systems

System 10

Aperçu
Galerie
Fonctionnalités
Spécifications
Commentaires

Aperçu

System 10

Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and cW-style body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

Description

Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
2.4 GHz range – completely free from TV interference
Three levels of diversity assurance: frequency, time, & space
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and set-up
State-of-the-art digital receiver for reliable performance
Balanced XLR and unbalanced 1/4” output jacks with level control

Plus d'infos

Overall System
Bandes de Fréquences	2.4 GHz ISM band (2400 to 2483.5 MHz)
Réponse en Fréquence	20 Hz to 20 kHz Depending on microphone type
Portée de Fonctionnement	30 m (100') typical Open range environment with no interfering signals
Distortion Harmonique Totale	<0.05% typical
Température de Fonctionnement	0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures

Handheld Transmitter
Puissance en Sortie	10 mW
Emissions Parasites	Following federal and national regulations
Type de Pile	Two 1.5V AA not included
Durée de vie des piles	>7 hours (alkaline) Depending on battery type and use pattern
Dimensions	254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Poids	280 grams (9.9 oz) without batteries
Accessoires Fournis	AT8456a Quiet-Flex stand clamp

Body Pack
Puissance en Sortie	10 mW
Durée de vie des piles	>7 hours (alkaline) Depending on battery type and use pattern
Type de Pile	Two 1.5V AA not included
Dimensions	70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Connecteurs en Entrée	Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Poids	100 grams (3.5 oz) without batteries
Emissions Parasites	Following federal and national regulations

Receiver
Système Récepteur	Diversity (frequency/time/space)
Niveau de Sortie Maximal	XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Alimentation	100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions	190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
Poids	290 grams (10.2 oz)
Accessoires Fournis	Power supply

System 10

Aperçu

System 10

Description

Plus d'infos

Commentaires