Rack-Mount Digital Wireless Systems
System 10 PRO
System 10 PRO
Aperçu
System 10 PRO
The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 100m away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
+11
Description
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 100m away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loops
Plus d'infos
| Overall System | |
|---|---|
| Bandes de Fréquences | 2.4 GHz ISM band (2400 to 2483.5 MHz) |
| Réponse en Fréquence | 20 Hz to 20 kHz Depending on microphone type |
| Portée de Fonctionnement | 60 m (200') Open range env. with no interfering signals |
| Distortion Harmonique Totale | <0.05% typical |
| Température de Fonctionnement | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
| Handheld Transmitter | |
|---|---|
| Puissance en Sortie | 10 mW |
| Emissions Parasites | Following federal and national regulations |
| Type de Pile | Two 1.5V AA not included |
| Durée de vie des piles | >7 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
| Poids | 280 grams (9.9 oz) without batteries |
| Accessoires Fournis | AT8456a Quiet-Flex™ stand clamp |
| Body Pack | |
|---|---|
| Puissance en Sortie | 10 mW |
| Durée de vie des piles | >7 hours (alkaline) Depending on battery type and use pattern |
| Type de Pile | Two 1.5V AA not included |
| Dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
| Connecteurs en Entrée | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| Poids | 100 grams (3.5 oz) without batteries |
| Emissions Parasites | Following federal and national regulations |
| Receiver | |
|---|---|
| Système Récepteur | Diversity (frequency/time/space) |
| Niveau de Sortie Maximal | XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV |
| Alimentation | 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
| Dimensions | 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D |
| Poids | 940 grams (33.2 oz) |
| Accessoires Fournis | AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
Commentaires
Téléchargements
Manual
Manual
Datasheet
Brochure