VM520EB
divider-line Dual Moving Magnet Stereo Cartridge with Elliptical stylus

VM520EB

VM520EB
    divider-line
  • Aperçu
  • Galerie
  • Fonctionnalités
  • Spécifications
  • Commentaires
divider-line

Aperçu

VM520EB

Dual Moving Magnet Stereo Cartridge with Elliptical stylus
VM520EB

Description

VM520EB

Dual Moving Magnet Stereo Cartridge

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

  • Aluminium cantilever
  • Para-toroidal coils improve generating efficiency
  • Centre shield plate between the left and right channels reduces crosstalk
  • Durable low resonance polymer housing

Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 Series

Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

Elliptical Bonded Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Plus d'infos

Cartridge & Stylus
Réponse en Fréquence 20 - 23,000Hz
Séparation des Canaux 27dB (1kHz)
Angle de Piste Vertical 23˚
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Fixation du Diamant Bonded Round Shank
Impédance de Charge Recommandée 47,000Ω
Impédance de la Bobine 2,700Ω (1kHz)
Tension de Sortie 4.0mV (1kHz, 5cm/sec.)
Equilibre des Canaux en Sortie 1.5dB (1kHz)
Type de Diamant Elliptical Bonded
Cantilever (levier porte-pointe) Aluminium Pipe
Compliance Statique 35 x 10-6 cm/dyne
Compliance Dynamique 8 x 10-6 cm/dyne (100Hz)
Montage 1/2” centres
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessoires Fournis Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Capacité de Charge Recommandée 100 – 200pF
Pointe de Lecture de Remplacement VMN20EB
Taille du Diamant 0.3 x 0.7 mil
Type de cellule VM Type
Poids 6.4g

Commentaires

Téléchargements

VM520EB_Manual_(Multi-Language)