Features
High Performance Low Latency
The 3000 Digital Series achieves an audio latency of just 2.5 ms. This level of latency is undetectable by human ear, delivering a seamless audio-performance and bringing your audience closer to the performance.
You’re in control
Easily monitor frequency coordination; equipment status and logs by the additional free of charge Audio-Technica Wireless Manager software available. For even more accuracy and peace of mind, real-time in-field walk-tests are possible, helping you spot operating range limits and dropout zones.
Cost & Space Saving
Up to five receivers can be cascaded together meaning no antenna distributor is required. Without the need for antenna distributors, the entire rack space can be slimmed down, reducing upstart, operating and travel costs.Â
Swappable Microphone Capsules
Swap and replace all the microphone capsules of the 3000 Digital Series with our range of interchangeable cardioid and hypercardioid capsules. This provides you with a more flexible soundscape with multiple options without having to purchase and carry around multiple microphone types, saving you money and travel space. If you’re needing to set up a different patterned microphone, you won’t have to spend time searching or be concerned if it’s charged - swap the heads and you’re good to go.
Featuring Enhanced Encryption Technology
The 3000 Digital Series uses a 4-digit code as a common encryption key, ensuring the set microphone and the receiver can communicate. The series also features AES256* encryption technology which protects audio signals from eavesdropping or leakage, so you can enjoy using Audio-Technica equipment with total confidence. *AES256 is an Advanced Encryption Standard established by the National Institute of Standards and Technology (NIST).
Charge Quickly & Efficiently
Two transmitters, equipped with a high-performance NiMH battery (not included), can be charged at the same time in one charging unit. Each transmitter can be fully charged in around 6.5 hours, and up to five chargers can be connected simultaneously. This eco-friendly and safe design is packed with features, such as automatically turning off the power when the transmitter is inserted. The charging status can be monitored via the network.Â
Easy & Sustainable Powering
The handheld microphone transmitter and the body pack transmitter can both be powered by AA batteries. Whilst we recommend these should be rechargeable (NiMH) for efficiency and environmental friendliness, if ever in a pinch after forgetting to charge or a performance continuing longer than expected, an easy and instant swap with AA alkaline batteries is possible with the 3000 Digital Series.
Scalable & Compatible
The 3000 Digital Series can be linked together with control and touch panel interfaces of external control devices. This link is smooth and requires very little setup for a seamlessly professional audio experience.
The Audio Technica Codec
Our proprietary Audio-Technica codec ensures the most efficient transfer of audio data. This efficiency results in a super-low latency of 2.5msec and aids high radio-frequency stability with true error correction for seamless and confident sound transmission.Â
Form Follows Function
The 3000 Digital Series range has been designed to be as sleek and low-profile as possible whilst being able to withstand drops and knocks on stage and in transport. The mixture of metals, acrylics and toughened plastics are light for the wearer and transmitter body packs are low profile enough to be unseen in many situations.
Specifications
Overall System | |
---|---|
Operating Frequencies | Band DE2E: 470.125 to 529.975 MHz Band EE1E: 530.000 to 589.975 MHz Band FF1E: 606.000 to 665.975 MHz |
Minimum Frequency Step | 25 kHz |
Modulation Mode | π/4-shift DQPSK |
Frequency Response | 20 to 22,000 Hz Depending on the microphone element used. |
Operating Range | 120 m Open range environment with no interfering signals. |
Dynamic Range | ATW-DT3101 (Mic input): 120 dB or higher, A-weighted, typical ATW-DT3101 (Inst input): 108 dB or higher, A-weighted, typical ATW-DT3102: 120 dB or higher, A-weighted, typical |
Total Harmonic Distortion | 0.1% or less (at 1 kHz, −20 dBFS) |
Number Of Channels | Up to 22ch in one 8 MHz TV channel |
Handheld Transmitter | |
---|---|
RF Power Output | High: 20 mW, Mid: 10 mW, Low: 2 mW |
Battery Type | Two alkaline or nickel-metal hydride 1.5 V AA batteries |
Battery Life | When using nickel-metal hydride 1.5 V AA batteries: Approx. 7 hours (1900 mAh High), approx. 9 hours (2500 mAh High) When using alkaline 1.5 V AA batteries: Approx. 6 hours (High) |
High-pass filter (low-freq. roll-off) | 80 Hz, 120 Hz, 160 Hz, 12 dB/octave |
Operating Temperature Range | −5°C to +40°C (23°F to 104°F) |
Dimensions | 193 mm (7.60") × 37 mm (1.46") (without microphone capsule) |
Net Weight | Approx. 205 g (7.23 oz) |
Accessories Included | Carrying case, AT8456a Quiet-Flexâ„¢ microphone stand clamp |
Body Pack | |
---|---|
RF Power Output | High: 20 mW, Mid: 10 mW, Low: 2 mW |
Battery Life | When using nickel-metal hydride 1.5 V AA batteries: Approx. 7 hours (1900 mAh High), approx. 9 hours (2500 mAh High) When using alkaline 1.5 V AA batteries: Approx. 6 hours (High) |
Battery Type | Two alkaline or nickel-metal hydride 1.5 V AA batteries |
Dimensions | 64 mm (2.52") × 23 mm (0.91") × 82 mm (3.23") (W × D × H) |
Input Connections | Four pin locking connector (Pin 1: GND, pin 2: INST INPUT, pin 3: MIC INPUT, pin 4: DC BIAS +5 V) |
Net Weight | Approx. 105 g (3.7 oz) |
High-pass (low-freq. roll-off) | 80 Hz, 120 Hz, 160 Hz, 12 dB/octave |
Operating Temperature Range | −5°C to +40°C (23°F to 104°F) |
Accessory Included | Carrying case |
Receiver | |
---|---|
Receiving System | True Diversity |
Image Rejection | 70 dB |
RF Sensitivity | −98 dBm (10−5 BER) |
Maximum Output Level | 18 dBV (Line), −12 dBV (Mic) |
Antenna Input | BNC-type, 50 ohms |
Antenna Power | 12 VDC, 150 mA (combined) |
Power Supply | 100 to 240 VAC (50/60 Hz) |
Operating Temperature Range | −5°C to +40°C (23°F to 104°F) |
Dimensions | 483 mm (19.02") × 385 mm (15.16") × 44 mm (1.73") (W × D × H) |
Weight | Approx. 4.1 kg (144.6 oz) |
Accessories Included | 1/2λ whip antenna × 2, power cable, rubber legs × 4 |
Downloads
Software & Firmware
Visit our downloads page for the most up-to-date software and firmware.
If you require assistance identifying the correct software/firmware or need help with installation then please contact us.