600 Series Freeway

Overview

600 Series Freeway

Audio-Technica’s popular 600 Series Freeway UHF wireless systems provide frequency-agile professional performance at an extremely affordable price. This easy-to-use wireless features 10 selectable channels in one of two frequency bands, adjustable squelch and volume controls. Each system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter. For multiple-mic applications, as many as four systems in each of two available frequency bands may be used together, allowing multi-channel combinations with up to eight channels using only 600 Series systems.

Features

Frequency-agile with 10 selectable UHF channels
Available in two frequency bands: Band A: 470 - 480 MHz (TV channels 14 - 15) Band B: 482 - 492 MHz (TV channels 16 - 17)
Advanced dipole antenna system
Adjustable squelch control
Removable docking power supply inserts into back of receiver
ATW-T601 UniPakTM transmitter includes Super Hi-Z input that provides optimum load for guitar pickups
ATW-T602 handheld microphone/transmitter features a dynamic unidirectional element with superior internal shock mounting

Specifications

Overall System
Operating Frequencies	UHF band Band A: 470.000 MHz to 479.750 MHz Band B: 482.000 MHz to 491.750 MHz
Modulation Mode	FM
Maximum Deviation	±15 kHz
Frequency Response	ATW-601: 50 Hz to 16 kHz ATW-602: 100 Hz to 13 kHz
Frequency Stability	±0.005%, Phase Lock Loop frequency control
Operating Range	150' minimum
Operating Temperature Range	40° F (4° C) to 110° F (43° C)
Number Of Channels	10

Handheld Transmitter
RF Power Output	10 mW nominal, 5 mW typical
Spurious Emissions	Under federal regulations
Microphone Element	Dynamic unidirectional
Battery Type	9V (NEDA type 1604) alkaline, not included
Battery Life	4-5 hours (depending on battery type and use pattern)
Current Consumption	60 mA typical
Dynamic Range	>=90 dB, A-weighted
Dimensions	9.65" (245.0 mm) long, 2.11" (53.5 mm) diameter
Net Weight	11.2 oz (316 g)
Accessories Included	AT8456a Quiet-Flex™ stand clamp

Body Pack
RF Power Output	10 mW nominal, 5 mW typical
Battery Life	4-5 hours (depending on battery type and use pattern)
Battery Type	9V (NEDA type 1604) alkaline, not included
Current Consumption	60 mA typical
Dimensions	2.56" (65.0 mm) W x 4.41" (112.0 mm) H x 0.87" (22.0 mm) D
Input Connections	High impedance, low impedance, bias
Net Weight	3.2 oz (89 g)
Spurious Emissions	Under federal regulations
Dynamic Range	>=90 dB, A-weighted

Receiver
Receiving System	Synthesized 10-channel non-diversity dual antenna system
Image Rejection	50 dB minimum
Sensitivity	25 µV for 60 dB S/N (IEC-weighted)
Power Supply	120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply
Operating Temperature Range	40° F (4° C) to 110° F (43° C)
Dimensions	8.27" (210.0 mm) W x 1.72" (43.5 mm) H x 4.73" (120.0 mm) D
Weight	18.9 oz (536 grams); without AC adapter, 11.9 oz (336 grams)
Accessories Included	AD1202A 120V docking AC adapter; 120V AC IEC cordset
Total Harmonic Distortion	<=1% (10 kHz deviation at 1 kHz)
Audio Output	350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
Output Connector	1/4" TS ("mono") phone jack

Downloads

600 Series Freeway® Manual