Fully Automatic Belt-Drive Stereo Turntable

AT-LP3

Out of Stock

AT-LP3

Overview

AT-LP3

The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a 1/2" mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing.

+10

Features

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Balanced straight tone arm with hydraulically damped lift control and rest
Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
Switchable pre-amp modes for moving magnet and moving coil cartridges
½" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat
Damped base construction for reduced low-frequency feedback coloration
Includes 45 RPM adapter and removable hinged dust cover
Available in black (AT-LP3BK) and white (AT-LP3WH)

Specifications

Turntable
Type	Belt-drive turntable, fully automatic
Motor	DC servo-controlled
Speeds	33-1/3 RPM, 45 RPM
Turntable Platter	Die-cast aluminum
Wow and Flutter	Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio	>50 dB (DIN-B)
Output Level	Pre-amp “PHONO”: 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 129-313 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	36 dB nominal, RIAA equalized
Power Supply Requirements	120V AC, 60 Hz
Dimensions	434.0 mm (17.1") W x 128.0 mm (5.0") H x 350.0 mm (13.8") D
Weight	5.2 kg (11.5 lbs.)
Accessories Included	AT91R Dual Moving Magnet stereo cartridge with replaceable stylus; 1/2" mount universal headshell; power cord; 45 RPM adapter; removable hinged dust cover; 4 mm rubber mat
Notes	Replacement Stylus: ATN91R

Downloads

AT-LP3 Manual