Discontinued
Cardioid Condenser Microphone
AT3035
AT3035
Features
- Custom-engineered large diaphragm for exceptional detail and low noise
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- High max SPL, wide dynamic range and optimized output level provide unmatched versatility
- Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
- Extended low-frequency response for rich, full sound
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Cardioid |
Frequency Response | 20-20,000 Hz |
Low Frequency Roll Off | 80 Hz, 12 dB/octave |
Open Circuit Sensitivity | -32 dB (25.1 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) |
Noise | 12 dB SPL |
Dynamic Range | 136 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 82 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 3 mA typical |
Switches | Flat, roll-off; 10 dB pad (nominal) |
Weight | 13.8 oz (390 g) |
Dimensions | 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | AT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch |
Audio-Technica Case Style | R5 |
Downloads
AT3035 Specification Sheet