AT4050
Multi-pattern Condenser Microphone

AT4050

AT4050
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

AT4050

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Audio-Technica’s AT4050. For performance that legends are made of.
AT4050

Features

  • Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Custom shock mount provides superior isolation

Specifications

Microphones
Element Externally-polarized (DC bias) condenser
Polar Pattern Cardioid, Omnidirectional, Figure-of-eight
Frequency Response 20-18,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -36 dB (15.8 mV), re 1V at 1 Pa
Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Noise 17 dB
Dynamic Range 132 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements 48V DC, 4.2 mA typical
Switches Polar selection; Flat, roll-off; 10 dB pad (nominal)
Weight 18.0 oz (510 g)
Dimensions 7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connectors Integral 3-pin XLRM-type
Accessories Included AT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
Audio-Technica Case Style R1

Downloads

AT4050 Submittal Sheet
AT4050 Specification Sheet