Discontinued
Subminiature Omnidirectional Condenser Lavalier Microphone
AT899
From
$225.00
From
Out of Stock
AT899
Features
- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- All wireless models available in either low-reflectance black or beige
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
- Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
- 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- Also available as: AT899c – less power module; 55" (1.4 m) cable, unterminated AT899c-TH – same as AT899c but in "theater" color (beige) AT899cL4 – less power module; 55" (1.4 m) cable terminated with Lemo connector for Sennheiser SK wireless systems AT899cL4-TH – same as AT899cL4 but in "theater" color (beige) AT899cT4 – less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems AT899cT5 – less power module; 55" (1.4 m) cable terminated with TA5F connector for LetroSonics wireless systems AT899cT5-TH – same as AT899cT5 but in "theater" color (beige) AT899cH – less power module; 55" (1.4 m) cable terminated with a screw-down 4-pin connector for use with Audio-Technica wireless systems featuring cH-style connector AT899cH-TH – same as AT899cH but in "theater" color (beige) AT899cW – less power module; 55" (1.4 m) cable terminated with a locking 4-pin connector for use with Audio-Technica wireless systems featuring cW-style connector AT899cW-TH – same as AT899cW but in "theater" color (beige)
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 20-20,000 Hz |
Low Frequency Roll Off | 80 Hz, 12 dB/octave |
Open Circuit Sensitivity | Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa |
Output Impedance | Phantom: 200 ohms - Battery: 250 ohms (wired only) |
Maximum Input Sound Level | Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | Phantom: 108 dB, 1 kHz at Max SPL Battery: 86 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 64 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Battery Type | 1.5V AA/UM3 |
Battery Current/Life | 0.4 mA / 1200 hours typical (alkaline) |
Switches | Flat, roll-off (recessed) |
Weight (Microphone) | 0.02 oz (0.5 g) |
Weight (Power Module) | 3.6 oz (102 g) |
Weight | Microphone 0.5 g - Power module 102 g |
Cable | 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module |
Dimensions | Microphone 16.0 mm long, 5.0 mm diameter - Power Module 145.0 mm long, 21.0 mm diameter |
Dimensions (Power Module) | 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter |
Dimensions (Microphone) | 0.63" (16.0 mm) long, 0.20" (5.0 mm) diameter |
Output Connector (Power Module) | Integral 3-pin XLRM-type |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case |
Audio-Technica Case Style | M29 |
Downloads
AT899 Submittal Sheet
AT899 Specification Sheet