5000 Series handheld microphone/transmitter body


  • Overview
  • Gallery
  • Features
  • Specifications



5000 Series handheld microphone/transmitter body (handle only, capsule sold separately) with industry-standard thread mount for use with ATW-C510, ATW-C710, ATW-C4100, ATW-C6100, ATW-C3300, and ATW-C5400 interchangeable wireless microphone capsules (or other compatible capsules). Includes AT8456a Quiet-Flex stand clamp.


  • Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
  • Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power
  • Features high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low-handling noise


Overall System
Operating Frequencies Band DE1: 470.125 to 590.000 MHz
Band EG1: 580.000 to 699.875 MHz
Band GH1: 700.125 to 819.875 MHz
Note that some frequency bands might not be available in country or region in which you live, or could come with a
Minimum Frequency Step 25 kHz
Modulation Mode FM
Maximum Deviation ±40 kHz (THD:10%)
Frequency Response 33 to 16,300 Hz Depending on attached microphone element.
Operating Range 100 m (328') Open range environment with no interfering signals.
Dynamic Range 116 dB or higher (A-weighted), typical
Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range -5°C to +45°C
Handheld Transmitter
RF Power Output High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Spurious Emissions Following federal and national regulations
Microphone Element Interchangeable industry standard thread
Battery Type Two 1.5V AA, not included
Battery Life High: 6.5 hours, Mid: 8 hours, Low: 9.5 hours (alkaline) Depending on battery type, usage and environmental conditions.
Dimensions 193 mm long, 37 mm maximum diameter
Net Weight 200 g
Accessories Included AT8456a Quiet-Flex™ stand clamp (5/8"-27 male to 3/8"-16 female threaded screw adapter), Protective carrying case (AT-BG3)