ES947/LED

Overview

ES947/LED

This phantom-powered cardioid condenser microphone is designed for clear, highly intelligible sound reinforcement, conferencing, professional recording, television and other demanding sound pickup applications. Tabletop mounting keeps the microphone unobtrusive. LED ring indicates muting status. Equipped with UniGuard® RFI-shielding innovations. Contractor-exclusive line.

Features

Mounts unobtrusively in tabletops
Capacitive-type touch-sensitive switch allows users to easily mute/un-mute the microphone
Integral LED ring indicates mute status – stays green when mic is live, turns red when muted
Low-profile element provides uniform cardioid polar pattern with 120° acceptance angle
Self-contained power module with XLRM-type output connector
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Requires 11V to 52V DC phantom power
Rugged all-metal case with a two-layer steel mesh grille
Isolators provide mechanical dampening of mounting surface vibration
Available in two colors: black (ES947/LED) and silver (ES947SV/LED)

Specifications

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response	40-13,000 Hz
Open Circuit Sensitivity	-40 dB (10 mV) re 1V at 1 Pa
Maximum Input Sound Level	142 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	114 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	66 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 5.7 mA typical
Switches	Touch-sensitive control: on/mute
Weight	66 g (2.3 oz)
Dimensions	84.8 mm (3.33") long, 38.0 mm (1.49") diameter 48.0 mm (1.89") maximum width
Output Connector	Integral 3-pin XLRM-type
Accessories Included	One pair isolators

Downloads

ES947/LED Submittial Sheet