Single-Ear Broadcast Headset
BPHS2S
BPHS2S
Features
- Low-profile, closed-back, single-ear design provides comfortable one-ear monitoring
- Proprietary 45 mm large-aperture driver (the same used in the ATH-M60x pro headphones) with rare earth magnet and copper-clad aluminum wire voice coil
- Hypercardioid dynamic microphone with frequency response tailored for commanding, broadcast-ready vocal reproduction
- Carefully crafted using key metal components for lasting durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpad, temple pad and headband allow headset to be worn comfortably for hours on end
- Pads and headband detach for easy replacement
- 3.0 m (9.8') detachable cable (BPCB2) with TA6F connector at headset, and 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") connector (headphone) outputs
- Unterminated detachable cable (BPCB3) is available separately
- Also available: BPHS2S-UT Single-ear Broadcast Headset with unterminated BPCB3 cable (BPHS2S-UT, Stereo Broadcast Headset with hypercardioid dynamic microphone (BPHS2) and Stereo Broadcast Headset with cardioid condenser microphone (BPHS2C)
Specifications
Microphone | |
---|---|
Element | Dynamic |
Polar Pattern | Hypercardioid |
Frequency Response | 50 - 14,000 Hz (@ 2 cm) |
Open Circuit Sensitivity | –57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz) |
Dimensions | Height: 18.0 mm (0.71”), Main unit maximum diameter: 23.4 mm (0.92”) |
Output Connector | TB6M |
Headphones | |
---|---|
Type | Closed-back Dynamic (Headphone) Hypercardioid Dynamic (Microphone) |
Driver Diameter | 45 mm (Headphone) |
Frequency Response | 15-28,000 Hz (Headphone) 50-14,000 Hz (Microphone) |
Maximum Input Power | 1,600 mW at 1 kHz (Headphone) |
Maximum Output | 1,600 mW |
Sensitivity | 102 dB (Headphone) -57 dB (1.4 mV) re 1V at 1 Pa (Microphone) |
Impedance | 38 ohms (Headphone) 550 ohms (Microphone) |
Weight | 190 g (6.7 oz) |
Cable | Detachable 3.0 m (9.8') long cable with 6-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 3.5 mm (1/8") phone plug (headphone) outputs |
Connector | TB6M jack |
Magnet | Neodymium (Headphone) |
Voice Coil | Copper-clad aluminum wire |
Accessories Included | Pouch; 3 windscreens; cable clip; 6/3 mm (1/4") screw-on adapter |
Downloads
BPHS2S User Manual