Cardioid Condenser Microphone

AT4041

Overview

AT4041

This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Features

Smooth, extended frequency response with a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
Switchable hi-pass filter and rugged turned-brass microphone housing

Specifications

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	20-20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-36 dB (15.8 mV), re 1V at 1 Pa
Maximum Input Sound Level	145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	121 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	70 dB, 1 kHz at 1 Pa
Phantom Power Requirements	48V DC, 3.2 mA typical
Switches	Flat, roll-off
Weight	4.2 oz (120 g)
Dimensions	6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
Audio-Technica Case Style	S1

Downloads

AT4041 Submittal Sheet

AT4041 Specification Sheet