Professional Direct Drive Manual Turntable

AT-LP140XP

Overview

AT-LP140XP

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminum platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Direct-Drive with High-Torque Motor

Designed for DJs

This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

Direct-Drive with High-Torque Motor

S-Shaped Tonearm

AT-XP3 Dual Magnet™ Phono Cartridge

Fully Manual Operation

Take Control

Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Cartridge Assembly Line Circa 1962

Over 55 Years of Analog Excellence

We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Features

Experience high-fidelity audio and professional DJ performance
Direct-drive, high-torque servo motor with speed stabilization
Fully manual operation
Adjustable dynamic anti-skate control
Selectable 33/45/78 RPM speeds
Professional anti-resonance, mass-damped, die-cast aluminum platter with felt mat
AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
Dedicated phono-level output (5.5 mV)
Stroboscopic platter with speed indicator
Forward/reverse operation and variable pitch control with quartz speed lock
Popup stylus target light for easier cueing in low light
Damped base construction for reduced low-frequency feedback coloration
Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
Available in black (AT-LP140XP-BK) and silver (AT-LP140XP-SV)

Specifications

Turntable
Type	3-speed, fully manual operation
Motor	High-torque DC motor
Drive Method	Direct drive
Speeds	33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter	Die-cast aluminum
Starting Torque	>2.2 kgf.cm
Wow and Flutter	<0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio	>50 dB
Output Level	5.5 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements	115/230V AC, 60/50 Hz
Dimensions	452.0 mm (17.80") W x 352.0 mm (13.86") D x 158.6 mm (6.24") H
Weight	10.0 kg (22 lbs.), without dust cover
Accessories Included	AT-XP3 phono cartridge; AT-HS6 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter
Pitch Variation	+/-8% or +/-16% or +/-24%
Notes	Tonearm type: Balanced S-shaped tonearm with detachable headshell Effective arm length: 230.5 mm Overhang: 16 mm Tracking error angle: Less than 3 degrees Applicable cartridge weight: 3.5-8.5 g Anti-skating range: 0-4 g Replacement Stylus: ATN-XP3