X/Y Stereo Studio Microphone


Niet op voorraad
  • Overzicht
  • Gallerij
  • Eigenschappen
  • Specifications
  • Reviews



X/Y Stereo Studio Microphone




Designed specifically for stereo field recording, interviews and home recording, the compact and lightweight AT2022 is suitable as a handheld microphone as well as when mounted on a boom or camera. Ideal for recording reports, the AT2022 unidirectional condenser capsules provide you professional quality stereo, without the need for 48V phantom power. Its 1.5V AA battery enables you to connect to virtually any audio recorders. The capsules can be rotated 90 or 120 degrees, to control the stereo width of your recording, and fold completely for easy storage and transportation.

  • X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
  • User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
  • Provides the spatial impact and realism of a live sound field
  • Battery operation allows use with most recording devices
  • Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
  • Ideal for general stereo recording and field sound capture
  • Excellent channel separation
  • Works with a standard 1.5V AA battery (included)
  • Included fuzzy windscreen offers excellent wind protection

“stereo jack to reach everyone”

No more time wasted setting up of a pair of condenser mics, 2 feet and a recorder with phantom power to make a professional stereo sound recording. The AT2022 simply connects to any recorder and achieves a perfect X/Y stereo sound recording.

“spatial realism”

Ideal for general stereo recording and field sound capture, the AT2022 reproduces the spatial impact and realism of a live sound field.

“Gentle filter slope”

With its gentle filter slope of 6 dB / Octave at 150 Hz, low frequencies are monitored very soft and natural way. An integral 150 Hz low-cut filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

X/Y setup at 90° to 120°

Two unidirectional capsules positioned in an X / Y configuration provide user-selectable 90° to 120° stereo operation for narrow or wide pickup patterns.

Low-cut filter

Switchable Off / Flat / Low-cut positions for better isolation of unwanted noise.

Easy storage

The capsules can be placed at 180° during storage to prevent damage to the unidirectional elements.


Comes with an AT8405a stand clamp for 5/8"-27 threaded stands, a 1.5V AA battery, a fuzzy windscreen, a 0.5 m long jack to XLR (TRS) cable, and a soft protective pouch.


Element Fixed-charge back plate, permanently polarized condenser
Polair patroon X/Y Stereo
Frequentierespons 20 - 20,000 Hz
Lage frequentie roll-off 150 Hz, 6 dB/octave
Gevoeligheid open circuit -41 dB (8.9 mV) re 1V at 1 Pa
Kanaalbalans <2.5 dB
Maximaal geluidingangsniveau 122 dB SPL, 1 kHz at 1% T.H.D.
Dynamisch bereik 103 dB, 1 kHz at Max SPL
Signaal-ruisverhouding 75 dB, 1 kHz at 1 Pa
Batterijtype 1.5V AA/UM3
Batterijspanning/levensduur 1.2 mA / 500 hours typical (alkaline)
Schakelaars Off, on/flat, on/roll-off
Gewicht 270g
Kabel 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
Afmetingen 192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter
Uitgangsconnector Integral 3-pin XLRM-type
Meegeleverde accessoires AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch



AT2022 Declaration of Conformity
AT2022 Frequency Response
AT2022 Polar Pattern
AT2022 Specification Sheet