BP4073
Line + gradient condenser microphone, 233 mm

BP4073

BP4073
  • Overzicht
  • Gallerij
  • Eigenschappen
  • Specifications

Overzicht

BP4073

Line + gradient condenser microphone, 233 mm

Eigenschappen

BP4073

short and lightweight, ideal for recording in the field

Created after intensive field research and from extensive user feedback, the BP4073 short shotgun microphone is ideal for creating a high quality audio sound recording. It is intended for documentaries, professional recordings in the wild, and theater sound reinforcement. Highly directional, the BP4073 has low self noise and extremely focused sound recording.

  • Short (233mm) shotgun microphone, designed for use in broadcasting, film/TV production and theater sound reinforcement applications
  • Its compact size and light weight (99g) allow it to be mounted on a camera or on a fishpole boom, keeping it out of shot
  • Highly directional, it perfectly captures all frequency ranges (20Hz to 20kHz)
  • Perfect intelligibility, even in noisy environments thanks to excellent off-axis noise rejection
  • The Double Wave Diaphragm proprietary technology offers high sensitivity with low self noise
  • Direct-coupled, balanced output ensures a clean signal even in high-output conditions
  • Innovative acoustic design provides same directivity as mics up to 50% longer
  • Switchable 80 Hz hi-pass filter & 10 dB pad
  • Rugged housing made of lightweight structural-grade aluminum alloy
  • Effective protection against mobile phone interference and other unwanted radio frequency
  • Comes with a foam windscreen

“Low-cut filter”

The low-cut position reduces sensitivity to ambient low frequency noise such as traffic noise, ventilation, reverberation of the room or mechanical vibrations transmitted through the recording device.

“Short ant lightweight shotgun mic”

Especially suitable for mounting on a fishpole boom or outdoors on professional camera, the BP4073 weighs only 99 grams and has a length of just 23.3 cm.

“High intelligibility”

Its very narrow directivity provides the narrow acceptance angle needed to capture far away sound whilst maintaining excellent off-axis noise rejection. The BP4073 guarantees very specific audio capture with high intelligibility.

Robust body

Robust microphone design made of lightweight aluminum alloy, which allows it to be positioned it on a boom, a camera or on a tripod.

Low-cut filter

Switchable low-cut filter for better insulation of unwanted noise.

Line + gradient

The BP4073 combines a directional capsule (gradient) and an interference tube to remove the sound from the rear.

Accessories

Comes with a clip, a foam windscreen, two O-rings and a protective carry case.

Specifications

Microphones
Element Externally polarized (DC bias) condenser
Polair patroon Line + gradient
Frequentierespons 20-20,000 hz
Lage frequentie roll-off 80 Hz, 18 dB/octave
Gevoeligheid open circuit - 29 dB (35.5mV), re 1V at 1 Pa
Maximaal geluidingangsniveau 141 dB SPL, 1 kHz at 1% T.H.D.
151 dB SPL, with 10 dB pad (nominal)
Dynamisch bereik 128 dB, 1 kHz at Max. SPL
Signaal-ruisverhouding 81 dB, 1 kHz at 1 Pa
Vereisten fantoomvoeding 48V DC, 4.8 mA typical
Schakelaars Flat, roll-off; 10 dB pad (nominal)
Gewicht 99 g
Afmetingen 233.0 mm (9.17") long, 21.0 mm (0.83") maximum body diameter
Uitgangsconnector Integral 3-pin XLRM-type
Meegeleverde accessoires AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 threaded adapter; AT8144 ; protective carrying case; two O-Rings

Downloads

BP4073 Dimensions
BP4071/L & BP4073 Quick Start Guide
BP4073 Declaration of Conformity
BP4073 Frequency Response
BP4073 Polar Pattern
BP4073 Datasheet