Broadcast Stereo Headset with Condenser mic. XLR + 6.3mm
BPHS2C
BPHS2C
+1
Eigenschappen
Created especially for news and sports broadcasting, this rugged stereo headset offers clear, articulate vocal reproduction, along with a comfortable fit and excellent sound isolation. Its low-profile, closed-back, on-ear design is based on the ATH-M60x professional monitor headphones and includes the same 45 mm large-aperture drivers, and premium, memory foam earpads and headband, giving users a high-fidelity headset that’s built to last.
The headset’s sleek cardioid condenser microphone keeps the pickup focused on the broadcaster’s voice, even in loud environments, and is tailored to reproduce that voice with a clear, articulate quality. The microphone sits at the end of a rigid boom with a strong, flexible gooseneck section that allows the microphone to be easily adjusted and then stay in place. The boom is also designed to swivel forward and back so that the headset can be worn with the mic positioned on either the right or left side.
Headset comes with a 3.0 m detachable cable (BPCB2) with a TA6F connector at the headset and, at the output end, a 3-pin XLRM-type connector for the microphone and a 6.3 mm (1/4") connector for the headphones. An unterminated version of the cable (BPCB3) is available separately.
Headset is also available with a dynamic microphone (BPHS2) and as a single-ear headset (BPHS2S).
- Low-profile, closed-back, on-ear design provides excellent isolation and fit
- Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
- Sleek cardioid condenser microphone with frequency response tailored for clear, articulate vocal reproduction
- Carefully crafted using key metal components for lasting durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
- Earpads and headband detach for easy replacement
- 3.0 m detachable cable (BPCB2) with TA6F connector at headset, and 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") connector (headphone) outputs
- Unterminated detachable cable (BPCB3) is available separately
- Headset is also available with a dynamic microphone (BPHS2) and as a single-ear headset (BPHS2S)
Specifications
| Microphone | |
|---|---|
| Element | Back electret condenser |
| Polair patroon | Cardioid |
| Frequentierespons | 60 - 15,000 Hz (@ 2 cm) |
| Gevoeligheid open circuit | –57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz) |
| Maximaal geluidingangsniveau | 140 dB SPL (1 kHz THD1%) |
| Dynamisch bereik | 106 dB (1 kHz at Max S.P.L.) |
| Signaal-ruisverhouding | 60 dB (1 kHz at 1 Pa, A-weighted) |
| Vereisten fantoomvoeding | 11 - 52V DC, 2 mA |
| Afmetingen | Height: 12.7 mm (0.5”), Minimum width: 12 mm (0.47”) |
| Uitgangsconnector | TB6M |
| Headphones | |
|---|---|
| Type | Closed-back dynamic |
| Diameter driver | Φ45 mm (1.77”) |
| Maximale output | 1,600 mW |
| Impedantie | 38Ω (312Ω when limiter switch is on) |
| Gewicht | 240 g (8.5 oz) without cable |
| Connector | TB6M jack |
| Meegeleverde accessoires | Windscreen x 3, clip, pouch |