AT-VM95ML/H
Eigenschappen
AT-VM95C/H
VM95 series Microlinear stereo cartridge on AT-HS6 Headshell
- AT-VM95ML mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
AT-VMN95C
AT-VMN95E
AT-VMN95EN
AT-VMN95ML
AT-VMN95SH
AT-VMN95SP
Microlinear Stylus
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.
Preassembled With AT-HS6BK Headshell
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell
Specifications
Cartridge & Stylus | |
---|---|
Frequentierespons | 20 - 25,000 Hz |
Kanaalscheiding | 23 dB (1 kHz) |
Verticale trackinghoek | 23° |
Vertical Tracking Force | 1.8 to 2.2g (2.0g standard) |
Naaldconstructie | Nude Square Shank |
Aanbevolen ladingsimpedantie | 47,000 Ω |
Spoelimpedantie | 3.3 kΩ (1 kHz) |
Gelijkstroomweerstand | 485 Ω |
Spoelinductantie | 550 mH (1 kHz) |
Uitgangsspanning | 3.5 mV (@ 1 kHz, 5 cm/sec) |
Balans uitgangskanaal | 1.5 dB (1 kHz) |
Naaldvorm | Microlinear |
Cantilever | Aluminium Pipe |
Statische compliantie | 20 x 10 – 6 cm / dyne |
Dynamische compliantie | 10 x 10 – 6 cm / dyne (100 Hz) |
Bevestiging | 1/2” centres |
Afmetingen | 21.2 × 21.4 × 62.4 ( H x W x D mm) |
Model | AT-VM95ML/H |
Aanbevolen ladingscapaciteit | 100-200 pF |
Vervangingsnaald | AT-VMN95ML |
Naaldgrootte | 2.2 x 0.12 mil |
Type | VM Stereo Dual Magnet |
Gewicht | 15.5 g |
Spoeldraad | T.P. Copper |