VM95 series Elliptical stereo cartridge on AT-HS6 Headshell


Niet op voorraad
  • Overzicht
  • Gallerij
  • Eigenschappen
  • Specifications
  • Reviews



VM95 series Elliptical stereo cartridge on AT-HS6 Headshell



VM95 series Elliptical stereo cartridge on AT-HS6 Headshell

  • AT-VM95E mounted on AT-HS6BK headshell
  • The total set weight is 15.5g
  • Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.







Elliptical Bonded Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Preassembled With AT-HS6BK Headshell

The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell


Cartridge & Stylus
Frequentierespons 20 - 22,000 Hz
Kanaalscheiding 20 dB (1 kHz)
Verticale trackinghoek 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Naaldconstructie Bonded Round Shank
Aanbevolen ladingsimpedantie 47,000 Ω
Spoelimpedantie 3.3 kΩ (1 kHz)
Gelijkstroomweerstand 485 Ω
Spoelinductantie 550 mH (1 kHz)
Uitgangsspanning 4.0 mV (@ 1 kHz, 5 cm/sec)
Balans uitgangskanaal 2.0 dB (1 kHz)
Naaldvorm Elliptical
Cantilever Aluminium Pipe
Statische compliantie 17 x 10 – 6 cm / dyne
Dynamische compliantie 7 x 10 – 6 cm / dyne (100 Hz)
Bevestiging 1/2” centres
Afmetingen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Model AT-VM95E/H
Aanbevolen ladingscapaciteit 100-200 pF
Vervangingsnaald AT-VMN95E
Naaldgrootte 0.3 x 0.7 mil
Type VM Stereo Dual Magnet
Gewicht 15.5 g
Spoeldraad T.P. Copper