VM95 series Microlinear stereo cartridge on AT-HS6 Headshell


  • Overzicht
  • Gallerij
  • Eigenschappen
  • Specifications
  • Reviews



VM95 series Microlinear stereo cartridge on AT-HS6 Headshell



VM95 series Microlinear stereo cartridge on AT-HS6 Headshell

  • AT-VM95ML mounted on AT-HS6BK headshell
  • The total set weight is 15.5g
  • Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.







Microlinear Stylus

Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Preassembled With AT-HS6BK Headshell

The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell


Cartridge & Stylus
Frequentierespons 20 - 25,000 Hz
Kanaalscheiding 23 dB (1 kHz)
Verticale trackinghoek 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Naaldconstructie Nude Square Shank
Aanbevolen ladingsimpedantie 47,000 Ω
Spoelimpedantie 3.3 kΩ (1 kHz)
Gelijkstroomweerstand 485 Ω
Spoelinductantie 550 mH (1 kHz)
Uitgangsspanning 3.5 mV (@ 1 kHz, 5 cm/sec)
Balans uitgangskanaal 1.5 dB (1 kHz)
Naaldvorm Microlinear
Cantilever Aluminium Pipe
Statische compliantie 20 x 10 – 6 cm / dyne
Dynamische compliantie 10 x 10 – 6 cm / dyne (100 Hz)
Bevestiging 1/2” centres
Afmetingen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Model AT-VM95ML/H
Aanbevolen ladingscapaciteit 100-200 pF
Vervangingsnaald AT-VMN95ML
Naaldgrootte 2.2 x 0.12 mil
Type VM Stereo Dual Magnet
Gewicht 15.5 g
Spoeldraad T.P. Copper