Cardioid Condenser Clip-on Instrument Microphone


  • Overzicht
  • Gallerij
  • Eigenschappen
  • Specifications



Cardioid Condenser Clip-on Instrument Microphone



it folds to your needs

Designed for saxophone, brass and percussion, the PRO35 is ideal in applications with high sound pressure levels, and for stage performances. It comes equipped with the UniMount® clamp, which allows for precise positioning, better impact resistance, and a good protection of the capsule.

  • Ideal microphone for sax, toms, brass and percussion
  • Cardioid polar pattern improves isolation of desired sound source and reduces the pickup of sounds to the sides and rear
  • Perfect for non-static stage performances
  • Extended frequency response renders all the subtle nuances of a performance
  • 80Hz low-cut filter on the power module
  • UniMount® clip allows for precise positioning, providing impact resistance and protecting the capsule
  • Gold plated corrosion-resistant contacts on the XLRM-type connectors
  • Excels in applications with high sound pressure level

“Extended frequency response”

The PRO35 has a dynamic range of 115 dB, a maximum SPL of 145 dB level and frequency response extends from 50 Hz to 15 kHz.

“Unimount® clip system”

The PRO35's UniMount® clip allows for accurate positioning, providing shock and vibration resistance whilst protecting the element.

“LOW-cut filter”

The AT8538 power module is equipped with a low-cut filter that removes frequencies below 80 Hz. This ensures the maximal removal of noise pollution (ground vibration of the instrument, or electric humming or other various buzzing), without altering the quality of the instrument sound capture.

Cardioid CAPSULE

Cardioid directivity for better isolation of the source, and resuction of sounds from the sides and rear.


The AT8418 Unimount clip (included) allows the precise positioning of the PRO35 on all types of instruments (brass, sax, percussion, ...)

Power supply

The PRO35 comes with its AT8538 power module with 80Hz low-cut filter and an exit to XLRM 3-pin connector.

Protective case

The PRO35 comes with a soft protective pouch for easy storage and transport.


Element Fixed-charge back plate, permanently polarized condenser
Polair patroon Cardioid
Frequentierespons 50-15,000 Hz
Lage frequentie roll-off 80 Hz, 18 dB/octave (wired only)
Gevoeligheid open circuit -45 dB (5.6 mV) re 1V at 1 Pa
Maximaal geluidingangsniveau 145 dB SPL, 1 kHz at 1% T.H.D.
Dynamisch bereik 115 dB, 1 kHz at Max SPL (wired only)
Signaal-ruisverhouding 64 dB, 1 kHz at 1 Pa
Vereisten fantoomvoeding 11-52V DC, 2 mA typical (wired only)
Schakelaars Flat, roll-off (wired only)
Weight (microphone) 0.3 oz (8 g)
Weight (power module) 2.9 oz (81 g) (wired only)
Kabel 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable
Dimensions (power module) 3.66" (92.9 mm) long,0.74" (18.9 mm) diameter (wired only)
Dimensions (microphone) 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
Output Connector (power module) Integral 3-pin XLRM-type (wired only)
Meegeleverde accessoires AT8418 UniMount® microphone instrument mount; AT8538 power module (wired only); soft protective pouch
Audio-Technica casetype M12


PRO35 Declaration of Conformity
PRO35 Frequency Response
PRO35 Polar Pattern
PRO35 Specification Sheet
PRO35cW Declaration of Conformity
PRO35cW Polar Pattern
PRO35cW Frequency Response